HIROSE ELECTRONIC Square Connectors（Applicable pin/contact：Female (socket)）

Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.[Features]· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.· Snap-lock: The snap-lock feature creates a tactile click when mating.· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.· Designed to allow for removal by ⌀1 mm pin when improperly wired.· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.[Features]· Small and lightweight connector due to metal shell.· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.[Features]• Metal shell makes it compact and sturdy.• Connectors can be mounted on the chassis, or on the front or back sides of the panel.• Height of the wiring side is greatly reduced to facilitate more compact sets.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

[Features]· A new type of connector in which IDC terminals are inserted into the case.· By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.· Terminals can be replaced after connection, providing excellent maintainability.· IDC part is protected by the case to provide a high level of reliability.· No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.· High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.· Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.[Applications]· Convenient for various types of wiring.· For all types of OA equipment, including copy machines and printers.

[Features]· The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.· Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.· Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.· Choose from gold or tin plating to match application. SMT-compatible products are also available.· Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.· Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).[Applications]· For all types of OA equipment, including copy machines and printers.

These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.[Features]· Has a metal shell and so has a small and lightweight connector.• They are integrated with RD-type molds and are of simple construction.• They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.• The connection and the board mounting areas are metal plated.• Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).• A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.• Various accessories can be employed to allow these connectors to be used in different applications.

A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).[Features]· Has a metal shell and so is small and lightweight.· Connector mounting can be performed on the chassis, front or back, or one of the sides.· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.[Features]· Small.· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)· Multipole· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.· Supports automatic mounting.· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.· Complete basic functionality despite compact form factor.· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.[Features]· Thin type.· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.· Circuit board mounting height: 2.5 mm.· This makes it possible to draw signals from places where there is no space between the circuit boards.· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.· Supports automatic mounting.· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.· Additionally, magazine packing is also available for the on-board type.· Four-walled type prevents socket from scraping the circuit board.· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.· Additionally, a reinforcement bracket is included to prevent solder from peeling.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.[Features]・Product variation: connection methods include board-to-board model and cable pressure connection.・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.[Features]· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.In-stock custom products cannot be returned or canceled. Thank you.

[Features]· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.· Contributing to a high-density board mounting.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.[Features]・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.・Low profile: pin heads are at a low height of 9.2 mm.・The space between circuit boards when stacking is 12.2 mm.

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.[Features]・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.・Thin type: mount height when used at a right angle: 4.8 mm.・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.・Further, there are settings available to provide a light feel even if tin plating is used.

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.[Features]· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.[Features]· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.· With an automatic extraction lever with lock release, an extraction tool is not required.· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.[Features]· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm. · Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry. · Full lock mechanism: Equipped with an outer-lock type full-lock mechanism. · 8 A current rating: Can carry a maximum current of 8 Amperes.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.[Features]· Has a metal shell and so has a small and lightweight connector.· The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.· Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.· With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.· The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.

A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.[Features]· Has a metal shell and so is small and lightweight.· Connector mounting can be performed on the chassis, front or back, or one of the sides.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.· A connection press can also be used.

The D terminal connector is for digital broadcast devices.[Features]・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.[Features]・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.[Features]· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.· The terminals are made compact by segregating according to those for power and those for signals.· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.· Guide pins are metallic to withstand coupling impact.· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force. In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.[Features]• This connector has a long service life and can be inserted and removed up to 20,000 times.• The terminal structure has high reliability, and is a 2-point contact bellows type.• In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.• By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.• Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.• The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.• Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.• The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.• Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.• Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.

Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.[Features]・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.・Power supply compatibility: The 24-pin type incorporates power source terminal type.・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.・Further, it is also possible to crimp using automated machines.・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

A rectangular multi-contact connector manufactured using a unique HIROSE design.[Features]· Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.· Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.· The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.· These connectors are specified in the NTT specifications, “Spec. No. 1931.”

This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular[Features]· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.· The single-action lock mechanism provides excellent operability.· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.· The dip connector includes a snap (circuit board temporary joint) bracket.· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.· Depending on the application, cable can be extracted in either the vertical or horizontal direction.