1

Categoria

Ver mais

Condições de filtragem

Limpar tudo

Centering
- Provided
- Not Provided
Fabricante
- MAEDLER (61)

MAEDLER Keyless Bushing (Fastening Fittings)

61 itens

* Informações sobre dias de expedição, custos de expedição e preços

Comparar especificações

Número de itens a exibir:Ordenar por:

Data de envio:

- Volume Discount
MAEDLER
Locking Assemblies SIG
Material: Stainless steel 1.4301 (AISI 304).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For lower torques.• Minimal space requirement.• Self-centering.• Axial movement during mounting.• The connection can be disassembled with a puller.Required tolerances: Shaft: h8.Bore of the part to be clamped: H8.Surface roughness Rz max. 12.5 μm.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
29.84 €～
Preço, incluindo IVA:
35.51 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies BAR
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Very good distribution of pressure.• Very good self-centering.• Self-releasing at dismounting.• Also suitable for large hub and shaft tolerances.• Slight axial offset possible during assembly.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
24.93 €～
Preço, incluindo IVA:
29.67 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies (Rigid Couplings) ST-K
Material: Steel.• For connecting two shafts, as a rigid coupling.• For medium torques.• Easy mounting.• Self-releasing at dismounting.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Not Provided - - - - - - -
Preço (excluindo IVA) a partir de:
20.28 €～
Preço, incluindo IVA:
24.13 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Welding Hubs for Taper Bushes
Material: Steel (St52 or comparable), good weldable.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft.Taper bush and chain plate wheel have to be ordered separately.Recommended bore tolerance: H8.Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
11.88 €～
Preço, incluindo IVA:
14.14 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 2517
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
17.42 €～
Preço, incluindo IVA:
20.73 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-B
Material: Steel.• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.• For medium torques.• Also suitable for small hub diameters.• Self-centering.• Self-locking.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
19.08 €～
Preço, incluindo IVA:
22.71 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 1008
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
5.14 €～
Preço, incluindo IVA:
6.12 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 1610
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
8.19 €～
Preço, incluindo IVA:
9.75 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 1615
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
9.73 €～
Preço, incluindo IVA:
11.58 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Miniature Clamping Bushes MSM-N
Material: Version MSM-N: Stainless steel 1.4305 (AISI 303).Concentricity: about 0.02 mm.Tolerance: Shaft k6-h10, Hub H8.PW ≈ 90N/mm², PN ≈ 70N/mm²
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
48.25 €～
Preço, incluindo IVA:
57.42 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Clamping Bushes E-N
Material: Stainless steel 1.405 (AISI 431).The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.Concentricity: 0.02 mm.Tolerances: Shaft h7 for d = 15 mm.Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.Shaft h8 for the other diameters d.Hub H7.Temperature range: -30 oC to 85 oC.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
427.52 €～
Preço, incluindo IVA:
508.75 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies BAR, Stainless
Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• Stainless Steel.• For low torques.• Very good distribution of pressure.• Very good self-centering.• Self-releasing at dismounting.• Also suitable for large hub and shaft tolerances.• Slight axial offset possible during assembly.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
96.16 €～
Preço, incluindo IVA:
114.43 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-B, Stainless
Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.• For low torques.• Also suitable for small hub diameters.• Self-centering.• Self-locking.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
71.08 €～
Preço, incluindo IVA:
84.59 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-C, Stainless
Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.Concentricity: 0.02 to 0.04 mm.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
72.66 €～
Preço, incluindo IVA:
86.47 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-L
Material: Steel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For very high torques.• Self-centering.• Slight axial offset possible during assembly.Concentricity: 0.02 to 0.04 mm.* When using in a stepped bore, the clearance C is to be foreseen for demounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
30.00 €～
Preço, incluindo IVA:
35.70 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies TT 17-35 mm
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For high torques.• Self-centering.• Axial offset during mounting (can be compensated by correct positioning).
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
40.96 €～
Preço, incluindo IVA:
48.74 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies TOK Version A
Material Version A: Steel, bright.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• Axial offset during mounting (can be compensated by correct positioning).
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
12.78 €～
Preço, incluindo IVA:
15.21 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies TMK Version A
Material Version A: Steel, bright.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• With a second hexagon to hold against while tightening the nut.• Axial offset during mounting (can be compensated by correct positioning).
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
15.88 €～
Preço, incluindo IVA:
18.90 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies SSGK
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For low torques.• Very short version.• Also suitable for small hub diameters.• Not self-centering.• Not self-locking.• Axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Not Provided - - - - - - -
Preço (excluindo IVA) a partir de:
12.42 €～
Preço, incluindo IVA:
14.78 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Clamping Bushes MSD
Material: Steel.The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.Concentricity: ≈ 0.03 - 0.06 mm.Tolerance: Shaft h8 - k6 (for Prod. No. 615 215 00 only h7), Hub H7.Temperature range: -30 °C to 85 °C.PW ≈ 90N/mm² PN ≈ 70N/mm132
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
199.10 €～
Preço, incluindo IVA:
236.93 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Clamping Bushes MSA
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium high torques and axial forces.• Minimal space requirement.• Self-centering.• Not self-locking.• Little axial movement during mounting.Concentricity: approx. 0.02 mm.Tolerance: Shaft h11 up to k6, Hub H7 up to H11.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
165.62 €～
Preço, incluindo IVA:
197.09 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Clamping Bushes E
Material: High-quality steel.The clamping bush consists of a double-walled steel sleeve filledwith a pressure medium, and a flange part. Inside the flange thereis a screw and a piston with seal to build up compression.Function: When the thrust screw is tightened, the sleeve expandsuniformly against shaft and hub, creating a rigid connectionthrough frictional force. When the thrust screw is loosened, thebush returns to its initial position and can be easily disassembled.Concentricity: 0.02 mm.Tolerances: Shaft h7 for d = 15 mm.Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.Shaft h8 for the other diameters d.Hub H7.Temperature range: -30°C to 85°C.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
255.76 €～
Preço, incluindo IVA:
304.35 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Spare Screws for Taper Bushes
Material: Steel.Supply: One screw. Order quantity as needed.Taper bushes have two or (from size 3525) three screws, depending on bush size. Thread BSW (Whitworth), with metric hexagon.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
0.72 €～
Preço, incluindo IVA:
0.86 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Adaptors for Taper Bushes
Material: Grey Cast Iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø da (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
7.07 €～
Preço, incluindo IVA:
8.41 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Bolt-on Hubs for Taper Bushes
Material: Grey Cast Iron GG25. Product No. 14090147: from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
14.46 €～
Preço, incluindo IVA:
17.21 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies BAR, QPQ-Coated
Material: Steel.• For fixing a hub on a shaft.• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).• For medium torques.• Self-centering.• Slight axial offset possible during assembly.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
28.53 €～
Preço, incluindo IVA:
33.95 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-A
Material: Steel.• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.• For medium high torques.• Not self-centering.• Self-releasing at dismounting.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Not Provided - - - - - - -
Preço (excluindo IVA) a partir de:
16.09 €～
Preço, incluindo IVA:
19.15 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-A, QPQ-Coated
Material: Steel.• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).• For medium high torques.• Not self-centering.• Self-releasing at dismounting.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Not Provided - - - - - - -
Preço (excluindo IVA) a partir de:
20.26 €～
Preço, incluindo IVA:
24.11 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-A, Stainless
Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.• For low torques.• Not self-centering.• Self-releasing at dismounting.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Not Provided - - - - - - -
Preço (excluindo IVA) a partir de:
51.84 €～
Preço, incluindo IVA:
61.69 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-AS
Material: Steel.• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.• For medium high torques. Like COM-A, but with slotted rings.• Not self-centering.• Self-releasing at dismounting.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Not Provided - - - - - - -
Preço (excluindo IVA) a partir de:
12.73 €～
Preço, incluindo IVA:
15.15 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-B, QPQ-Coated
Material: Steel.• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).• For medium torques.• Also suitable for small hub diameters.• Self-centering.• Self-locking.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
21.74 €～
Preço, incluindo IVA:
25.87 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-C
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium to high torques.• Self-centering.• No axial offset.Concentricity: 0.02 to 0.04 mm.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
20.05 €～
Preço, incluindo IVA:
23.86 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-CB1
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium high torques.• Self-centering.• Self-locking.• Axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
12.31 €～
Preço, incluindo IVA:
14.65 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-CB2
Material: Steel.• For fixing a hub (e.g. spur toothed gear or similar) on a shaft.• For medium high torques.• Self-centering.• Self-locking.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
12.69 €～
Preço, incluindo IVA:
15.10 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-CB3
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• 3 Ranges of sizes, for middle, higher and very high torques.• Compact size in axial direction.• Self-centering.• Self-locking.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
13.07 €～
Preço, incluindo IVA:
15.55 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-D
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For high torques.• Self-centering.• Slight axial offset possible during assembly.Concentricity: 0.02 to 0.04 mm.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
16.71 €～
Preço, incluindo IVA:
19.88 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-L, QPQ-Coated
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).• For very high torques.• Self-centering.• Slight axial offset possible during assembly.Concentricity: 0.02 to 0.04 mm.* When using in a stepped bore, the clearance C is to be foreseen for demounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
34.86 €～
Preço, incluindo IVA:
41.48 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-LL
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For very high torques.• Self-centering.• Self-locking.• Axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
32.52 €～
Preço, incluindo IVA:
38.70 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-LLH
Material: Steel.• For fixing a hub (e.g. sprocket or similar) on a shaft.• For very high torques.• Very good distribution of pressure.• High resistant against bending forces.• Self-centering.• Self-locking.• No axial movement during mounting.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Provided - - - - - - -
Preço (excluindo IVA) a partir de:
54.08 €～
Preço, incluindo IVA:
64.36 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Locking Assemblies COM-R
Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For lower to medium torques.• Not self-centering.• Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.• Up to 4 clamping sets can be used in line.• Versatile usage, for customized solutions.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- Not Provided - - - - - - -
Preço (excluindo IVA) a partir de:
5.93 €～
Preço, incluindo IVA:
7.06 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 1108
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
5.47 €～
Preço, incluindo IVA:
6.51 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 1210
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
7.18 €～
Preço, incluindo IVA:
8.54 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 1215
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
8.37 €
Preço, incluindo IVA:
9.96 €
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 2012
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
11.31 €～
Preço, incluindo IVA:
13.46 €～
Data de envio regular:
4 dias úteis
Configurar
- Volume Discount
MAEDLER
Taper Bushes 3020
Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.
Ler mais
Type Centering Body Material Shaft Bore Dia. d(mm) Allowable Torque Range(N•m) Surface Treatment Hub Dia. D1(mm) Tightening Structure Tightening Method
- - - - - - - - -
Preço (excluindo IVA) a partir de:
22.50 €～
Preço, incluindo IVA:
26.77 €～
Data de envio regular:
4 dias úteis
Configurar

Categorias relacionadas com Keyless Bushing (Fastening Fittings)