MITUTOYO Micrometers

?* Information on days to ship and prices

• 

  Micrometer Head, Medium-sized Standard, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefit:
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	67.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital 3-Point Internal Micrometer

  MITUTOYO

  These are three-point internal micrometers that offer you the following benefits:
  - Individual micrometer
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  - Large LCD display with character height of 7.5 mm enables you to read measurements easily.
  - Without setting rings or extensions.

  Starting from∗ ：	1,228.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	75.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Inside Micrometer Caliper Type

  MITUTOYO

  The Digimatic Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Starting from∗ ：	915.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Ball Anvil/Spindle Tip

  MITUTOYO

  These optional interchangeable anvils allow you to measure the over-pin diameter of gears.

  Starting from∗ ：	152.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Measuring Head Holtest/Borematic

  MITUTOYO

  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Economy Design Set

  MITUTOYO

  This Mitutoyo set of basic, cost effective, non-digital micrometers incorporating ratchet stops to guarantee repeatable measurement.

  Starting from∗ ：	290.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type, with Clamp Nut

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	74.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Ratchet Stop Plastic

  MITUTOYO

  Starting from∗ ：	12.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  326/126 Series, Replaceable Anvil Screw Thread Micrometer TMC

  MITUTOYO

  [Applications]
  · Used by replacing the spare stylus on a single main body.
  [Features]
  · The effective diameter of the screw can be read directly (calculation not needed).
  · Equipped with a constant pressure device.
  · With reference rod for reference point adjustment for metric (unified) 60°

  Starting from∗ ：	77.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3-Wire Thread Measuring, Series 313

  MITUTOYO

  The measuring wires are hardened and precision lapped. They are placed onto spindle and anvil of the outside micrometer. The three-wire measuring process is applied to determine the pitch diameter of threads and considered as one of the most accurate measuring procedures.

  Starting from∗ ：	4,381.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer Carbide Tipped Rod

  MITUTOYO

  This Depth Micrometer offers you the following benefits:
  - ∅4 mm measuring rod
  - Ratchet stop provides you with constant measuring force.
  - Measuring rod lock
  - Carbide-tipped measuring rod model is available.

  Starting from∗ ：	207.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Absolute Micrometer QuickMike

  MITUTOYO

  This Quickmike, with a non-rotating spindle, delivers much faster movement than standard models.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - With 10 mm feed per thimble rotation, it delivers twenty times as fast as standard devices.
  - Excellent resistance against water and dust (IP65) enables this micrometer to be used in machining situations that include splashing coolant fluid.
  - ABSOLUTE linear scale means no restriction on adjustment speed.
  - Larger measuring range - 30 mm compared with 25 mm - than standard micrometer.

  Starting from∗ ：	499.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer Head

  MITUTOYO

  This Micrometer Head has a 25 mm range and a 10 mm stem, and offers the following benefits:
  - You can integrate it into machinery and measuring instruments.
  - Measurement values are clearly displayed in 0.001mm increments.
  - Stem diameter: 10 mm

  Starting from∗ ：	513.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixture for Micrometer Head, with Clamp Nut

  MITUTOYO

  Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
  - These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
  - Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

  Starting from∗ ：	43.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Gear Tooth Micrometer

  MITUTOYO

  Measuring the over-pin diameter of gears. It has interchangeable steel or carbide ball inserts (optional accessory).

  Starting from∗ ：	410.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable, with Clamp Nut

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Differential Screw

  MITUTOYO

  This is a differential screw translator (extra-fine feed) type of micrometer head. It offers you the following benefits:
  Micrometer head with ultra-fine rate of travel.
  With its non-rotating spindle it is particularly suited to fine adjustments. The differential travel mechanism with double spindle enables ultra-sensitive travel

  Starting from∗ ：	265.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Heavy Duty, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	125.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Small Standard Type

  MITUTOYO

  This is a standard, small-sized micrometer head which offers you the following benefits:
  - Plain stem and a flat or spherical spindle end
  - Hardened steel measuring surface

  Starting from∗ ：	57.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Spanner

  MITUTOYO

  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Interchangeable Anvil

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with easily interchangeable anvils to enable a wide measuring range from one instrument. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	227.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Setting Standard V-Anvil Micrometer

  MITUTOYO

  Used for accurately setting V-anvil micrometers

  Starting from∗ ：	66.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tubular Inside Micrometer, Hardened Face, Inch

  MITUTOYO

  This is an extension rod type inside micrometer that offers you the following benefits:
  - Interchangeable extensions with cylindrical gage rods are spring-mounted in protective sleeves so you can extend the measuring range.
  - Carbide measuring faces are available.

  Starting from∗ ：	274.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  167 Series, Micrometer Reference Rod MB

  MITUTOYO

  Nominal dimensions (mm): 25 to 2000
  [Applications]
  For setting the reference point of the external micrometer.

  Starting from∗ ：	33.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Measuring Head Borematic

  MITUTOYO

  Starting from∗ ：	837.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3-Wire Thread Measuring

  MITUTOYO

  The measuring wires are hardened and precision lapped. They are placed onto spindle and anvil of outside micrometer. The three-wire measuring process is applied to determine the pitch diameter of threads and considered as one of the most accurate measuring procedures.

  Starting from∗ ：	240.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Blade Micrometer QuickMike

  MITUTOYO

  This ABSOLUTE Digimatic Blade Micrometer Quickmike is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle
  - Fast spindle feed of 10 mm/revolution

  Starting from∗ ：	1,017.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Blade Micrometer QuickMike, Inch/Metric

  MITUTOYO

  This ABSOLUTE Digimatic Blade Micrometer Quickmike is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle
  - Fast spindle feed of 10 mm/revolution

  Starting from∗ ：	1,338.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Disc Micrometer, Adjustable Force

  MITUTOYO

  The ABSOLUTE Digimatic Disc Micrometer Quickmike allows you to measure with a fast spindle feed of 10 mm per thimble rotation.
  It offers you the following benefits:
  - Suitable for measuring felt, rubber, cardboard, fabric etc.
  - Suitable to measure "root tangent length" of spur gears and helical gears.
  - With a non-rotating spindle and disc-shaped measuring surface.
  - Measuring force is adjustable for various kinds of workpieces (series 227)

  Starting from∗ ：	1,387.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Micrometer, Adjustable Force

  MITUTOYO

  This Quickmike has an adjustable measuring force to suit various kinds of workpieces.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - It's dedicated to applications requiring a constant/low measuring force such as measuring wire, paper and plastic/rubber parts.
  - Constant and low measuring force mechanism in the thimble.
  - Non-rotating spindle
  - Speedy spindle feed of 10 mm per thimble rotation

  Starting from∗ ：	1,214.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball Attachment

  MITUTOYO

  A Mitutoyo ball attachment for imperial micrometers up to 6 inch
  It fits on the anvil to form a spherical contact surface to enable measurement on concave surfaces, such as the inside of pipes.

  Starting from∗ ：	146.05 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Blade Micrometer

  MITUTOYO

  This Blade Micrometer is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts
  - Non-rotating spindle

  Starting from∗ ：	303.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Measuring Head Holtest

  MITUTOYO

  Starting from∗ ：	641.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Inside Micrometer

  MITUTOYO

  The Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with caliper jaws to enable measurement in confined spaces. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	390.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Can Seam Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer for measuring the width, height and depth of steel-can seams.

  Starting from∗ ：	262.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Color Ratchet Stop

  MITUTOYO

  Starting from∗ ：	15.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Color Speeder

  MITUTOYO

  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Crimp Height Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with pointed spindle to enable measurement of the crimp height of electrical contacts. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	301.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer

  MITUTOYO

  A Mitutoyo non-digital depth micrometer. The 63 mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.

  Starting from∗ ：	174.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer, Interchangeable Rods

  MITUTOYO

  This interchangeable rod type micrometer can be used for wide range measurements.
  It offers you the following benefits:
  - ∅4 mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement.
  - The ratchet stop provides constant measuring force.
  - Measuring rod lock

  Starting from∗ ：	170.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Gauge Micrometer

  MITUTOYO

  This Dial Gauge Micrometer allows you to quickly measure mass-produced parts.
  It offers the following benefits:
  - Designed to mount a dial or a Digital indicator for direct GO/NG judgement of mass-produced parts.
  - You can take rapid measurements thanks to its anvil retracting trigger.
  - 3 mm anvil retracting stroke

  Starting from∗ ：	443.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Snap Gauge without Indicator

  MITUTOYO

  A Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

  Starting from∗ ：	507.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Snap Gauge without Indicator, Inch

  MITUTOYO

  A Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

  Starting from∗ ：	507.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

Loading...