MITUTOYO Data Measurement Equipment（Page 4）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Hydraulic Articulated Stand
MITUTOYO
Fixed and adjustable columns are available in different lengths to always provide the right height level. Different sized brackets allow the correct positioning, if the grid of the base plate does not match the workpiece.Starting from∗ ： 227.37 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Radius and Protractor Chart
MITUTOYO
For measuring projectors. These standard overlay charts increase the range of application and the efficiency of Mitutoyo profile projectors. This chart set offers you the following benefits:
- The charts are supplied in sizes ø250. 300. 340. 500 to suit the screens of Mitutoyo projectors.
- A large range of scales and profiles is provided that enables you to test workpiece features quickly and easily. You can test length, height, parallelism, angle, radius, taper, bore position, diameter,as well as all standardized thread and tooth profiles.
- All charts are made of a distortion-free special plastics compound and are provided with a protective coating. Old No. 20..../51.... are discontinued but you can order it with the New No. 63AAA.... if it is not in the list we create it for you.Starting from∗ ： 475.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 2,480.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 2,216.84 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Starting from∗ ： 173.68 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Protractor Chart
MITUTOYO
For measuring projectors. These standard overlay charts increase the range of application and the efficiency of Mitutoyo profile projectors. This chart set offers you the following benefits:
- The charts are supplied in sizes ø250. 300. 340. 500 to suit the screens of Mitutoyo projectors.
- A large range of scales and profiles is provided that enables you to test workpiece features quickly and easily. You can test length, height, parallelism, angle, radius, taper, bore position, diameter,as well as all standardized thread and tooth profiles.
- All charts are made of a distortion-free special plastics compound and are provided with a protective coating. Old No. 20..../51.... are discontinued but you can order it with the New No. 63AAA.... if it is not in the list we create it for you.Starting from∗ ： 462.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 3.55 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
PROFINET I/F Unit for EJ Counter
MITUTOYO
The EJ-Counter is targeted at secondary and automatic embedded markets as well as conventional measurement rooms.
Multipoint measuring systems with a maximum of 16 gauges can be configured.
The EJ-Counter is attached to a DIN rail for use. Due to the small size of the unit, it can be installed inside of switchboards /equipment. When using multiple EJ Counters linked together, connection of power to one EJ Counter also supplies power to the other linked counters.
In addition, through the industrial I/F unit (sold separately), data can be managed on the upper side, and it is possible to support smart factories such as IoT and M2M.
Easy setup with the LG QuickSetup Tool software (free of charge) (USB interface is required).Starting from∗ ： 1,041.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 7.11 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Starting from∗ ： 8.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 10.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 1,126.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Multi-way Stylus M5 Ruby Ball, Carbide Stem
MITUTOYO
In order to reach multiple planes without stylus change, multi-tipped star styli can be used.Starting from∗ ： 530.26 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Multi-way Stylus Holder M5, Aluminium
MITUTOYO
Multiway stylus holders facilitate the flexible configuration of star styli.Starting from∗ ： 693.42 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Multiplexer Mux-10F
MITUTOYO
The MUX-10F 4 channel D-SUB9 serial interface is a microcontrolled interface that connects four measurement devices, with Digimatic output, to the RS-232C serial port of a computer.Starting from∗ ： 1,035.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Multiflex-profile Frame
MITUTOYO
The multiflexprofile frames with their rigid construction, provide a solid frame base for large workpieces that need to be measured. They feature two significant characteristics of the multiflex profile series for flexible fixturing application:
Dovetail profile Flexible repositioning with slider elements for rapid and cost effective changes of fixture points.
T-nut profile Additions can de added and freely positioned in the t-nut profile Can be combined with all kinds of profiles and add-on parts, even from third parties. multiflexprofile frames are compatible with the Mitutoyo multiflexprofile and are ideal for combining with the vari-fix clamping columns.Starting from∗ ： 88.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Multiflex-profile
MITUTOYO
The multiflexprofile series from Mitutoyo combines in one profile the advantages of three different kinds of profiles for modular fixture construction. Dovetail profile Flexible repositioning with slider elements for rapid and cost effective changes of fixture points. Grid profile Benefit from a fixed 50mm positioning grid for the reproducible addition of features. T-nut profile Additions can de added and freely positioned in the t-nut profile Can be combined with all kinds of profiles and add-on parts, even from third parties. multiflexprofile are compatible with the Mitutoyo multiflexprofile frames and are ideal for combining with the vari-fix clamping columns.Starting from∗ ： 77.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 166.97 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Starting from∗ ： 211.97 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Magnetic Support
MITUTOYO
The magnetic receiver component os used for quick and easy clamping of workpieces. Component M6 threadStarting from∗ ： 50.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
M2-2D Software for PJ and PH Series
MITUTOYO
Support for Clean, Intuitive DesignThe user interface design of the M2 software means you’ll spend more time measuring and less time reading manuals. By combining a familiar user experience with current touch screen conventions, the M2 software can quickly be integrated into your process and be accessible to a wide range of users.Designed for Multi-Touch software controlIn addition to the conventional mouse interface, expanded Multi-Touch logic allows for versatile pan and zoom of the active part view. Increase the efficiency of feature construction, feature data manipulation, and reporting tasks with a simple pinch zoom, swipe pan, or double click.Graphics-based “Part View” constructionsGenerate popular construction types, like Distances and Tangent Lines, from within the graphical part view itself. Constructions with multiple sub-types can be toggled quickly with the change feature type command. Supported construction types include:
Average Intersections Tangent Line(s)
Angle Compliments Offset Skew Lines Mid/Center Point(s)
Shortest DistanceGage Circle(s)
Perpendicular/Parallel Line(s)
End Point(s)
Farthest DistanceBolt CircleStarting from∗ ： 2,653.95 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
M2-2D Soft and Hardware for PV5110
MITUTOYO
Quick and easy measuring, with the innovative M2 software.
Spend more time measuring and less time reading manuals thanks to the M2 software’s straightforward and easy to operate user interface. Thanks to the familiar use of a touch screen, the M2 software can be quickly integrated into your process and drastically improve work efficiency.
- The M2 software interface is available for use in both portrait and landscape mode, providing maximum flexibility for the display or mounting device of your choosing.
- Gain access to many powerful features and an intuitive measuring interface whether you are using an optical edge equipped system or an externally generated crosshair device. Precise optical edge detection mechanisms provide accurate results as well as access to powerful, industrial grade, measurement functionality.Starting from∗ ： 4,547.37 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
M2 – Geometric Measuring Software
MITUTOYO
Quick and easy measuring, with the innovative M2 software. Spend more time measuring and less time reading manuals thanks to the M2 software’s straightforward and easy to operate user interface. the M2 software can be quickly integrated into your process and drastically improve work efficiency. The M2 software interface is available for use in both portrait and landscape mode, providing maximum flexibility for the display or mounting device of your choosing. Gain access to many powerful features and an intuitive measuring interface whether you are using an optical edge equipped system or an externally generated crosshair device. Precise optical edge detection mechanisms provide accurate results as well as access to powerful, industrial grade, measurement functionality.Starting from∗ ： 2,152.63 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Starting from∗ ： 43.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Loading Receiver Pallet
MITUTOYO
Repositiong receiver plate with repositioning receivers for 250mm and 500mm base plates. Achieve easy and precise repositioning and enhance your semi-automatic serial CMM measurement process by using the pallet receiver system plate with its 3 point repositioning system. Results in a significatly higher measurement throughput.Starting from∗ ： 1,360.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 5.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 12.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Knuckle/Swivel Joint M2, Stainless Steel
MITUTOYO
Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.Starting from∗ ： 89.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Knuckle Joint M3, Stainless Steel
MITUTOYO
Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.Starting from∗ ： 81.58 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Knuckle Joint M2, Stainless Steel
MITUTOYO
Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.Starting from∗ ： 81.58 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Keyboard Interface DMX-3T/FS2 USB
MITUTOYO
The DMX-3 T/FS2 USB is a keyboard interface that transmits measurement data from measuring instruments equipped with Digimatic interfaces to a PC. Measurement data is converted into keyboard codes, allowing you to easily access it with any program working with keyboard entries, regardless of the operating system. The USB and data conversation interfaces also allow you to directly input the measurement data into a spreadsheet.Starting from∗ ： 738.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 156.32 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Joint M5, Titanium
MITUTOYO
Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.Starting from∗ ： 84.08 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Joint M5, Stainless Steel
MITUTOYO
Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.Starting from∗ ： 53.88 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Joint M4, Stainless Steel
MITUTOYO
Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.Starting from∗ ： 53.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Joint M2, Stainless Steel
MITUTOYO
Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.Starting from∗ ： 69.87 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Starting from∗ ： 188.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 19.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 5.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 114.87 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Starting from∗ ： 247.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 13.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 2,778.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 342.11 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Fastening Element for Toggle Clamps
MITUTOYO
Fastening element for connecting the toggle clamps and receiving prisms.Starting from∗ ： 56.84 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 227.37 € *Unit price with basic configuration | 475.89 € *Unit price with basic configuration | 2,480.92 € *Unit price with basic configuration | 2,216.84 € *Unit price with basic configuration | 173.68 € *Unit price with basic configuration | 462.00 € *Unit price with basic configuration | 3.55 € *Unit price with basic configuration | 1,041.00 € *Unit price with basic configuration | 7.11 € *Unit price with basic configuration | 8.29 € *Unit price with basic configuration | 10.53 € *Unit price with basic configuration | 1,126.63 € *Unit price with basic configuration | 530.26 € *Unit price with basic configuration | 693.42 € *Unit price with basic configuration | 1,035.00 € *Unit price with basic configuration | 88.16 € *Unit price with basic configuration | 77.63 € *Unit price with basic configuration | 166.97 € *Unit price with basic configuration | 211.97 € *Unit price with basic configuration | 50.00 € *Unit price with basic configuration | 2,653.95 € *Unit price with basic configuration | 4,547.37 € *Unit price with basic configuration | 2,152.63 € *Unit price with basic configuration | 43.82 € *Unit price with basic configuration | 1,360.53 € *Unit price with basic configuration | 5.92 € *Unit price with basic configuration | 12.00 € *Unit price with basic configuration | 89.47 € *Unit price with basic configuration | 81.58 € *Unit price with basic configuration | 81.58 € *Unit price with basic configuration | 738.95 € *Unit price with basic configuration | 156.32 € *Unit price with basic configuration | 84.08 € *Unit price with basic configuration | 53.88 € *Unit price with basic configuration | 53.88 € *Unit price with basic configuration | 69.87 € *Unit price with basic configuration | 188.16 € *Unit price with basic configuration | 19.00 € *Unit price with basic configuration | 5.92 € *Unit price with basic configuration | 114.87 € *Unit price with basic configuration | 247.00 € *Unit price with basic configuration | 13.03 € *Unit price with basic configuration | 2,778.95 € *Unit price with basic configuration | 342.11 € *Unit price with basic configuration | 56.84 € *Unit price with basic configuration |
| Min. Shipping Days ： | 60 Days | 5 Days | 5 Days | 60 Days | 60 Days | 5 Days | 60 Days | 5 Days | 60 Days | 5 Days | 5 Days | 5 Days | 60 Days | 60 Days | 5 Days | 5 Days | 5 Days | 60 Days | 60 Days | 5 Days | 60 Days | 60 Days | 60 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 60 Days | 60 Days | 60 Days | 5 Days | 60 Days | 5 Days | 5 Days | 5 Days | 60 Days | 5 Days | 5 Days | 5 Days | 60 Days | 60 Days |
| Product Type | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
Narrow search by specifying Brand
-
- MAHR (368)
- MITUTOYO (331)
- NORELEM (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Data Measurement Equipment
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.