NABEYA Clamp Units (for Manual Tightening)

[Features]· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

[Features]· 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.· 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

Dedicated clamping screw for toggle clamps.

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

[Features]· Adsorption of workpieces is possible by simply supplying air from a compressor.· Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.· VCM0303E.· Supply valve can only turn the adsorption ON or OFF.· VCM0303S.· Adsorption and air blowing are both possible using the changeover switch.· The current adsorption force can be confirmed by vacuum pressure gauge.· Adsorption force can be adjusted by vacuum regulator

Flat jaw and angled handle for quick hold down clamp (medium).

6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.

6848VNI is made of stainless steel. The hook length can be adjusted.

[Features]· It is a compact clamp that does not lift much.· Ideal for machining thin, low-profile objects.· There are three sizes of tightening bolts: M4, M6, and M12.· It has a compact size and large stroke of 0.3 to 1.1.· The guide groove of the main body shortens workpiece setup time (excluding LWC4).· It has a structure that prevents chips from entering inside.· Ideal for small workpieces.· Brass material is used to avoid scratching workpieces.· Lifting up of the workpiece is minimal.· Ideal for thin workpieces.

Forged S45C/hardened HRC45 arm clamp.

[Features]· Bar for Quick Lock.· Annoying thread feeding when clamping is not necessary.· A one-action clamp that adopts a cam lock mechanism

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.

Wedge clamp set for T-grooves, flat type.

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.

This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.

Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.

It can steplessly fasten tall and short workpieces.

Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.

The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustment

[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· The tap hole opening is horizontal to the table. With stopper bolt.

[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· Especially for large processing machines

[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step part

S45C / quenched base unit low type (for T slot).

This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

[Features]· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.· Lifting prevention (generates force in the downward direction).· Ideal for thin workpieces.· Dovetail groove can withstand lateral force.· Free Mounting Position

[Features]· SS400 and galvanized toggle down clamp 6803.· 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.

Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.

Maximum tightening force: 40 kN (tightening torque: 190 N·m)

Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

Heavy-duty type hook clamp. The hook length can be adjusted.

Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.