Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
NABEYA Vises
Screw clamps, welding clamps, C-clamps (1)
Drilling Machine Vises (27)
Horizontal vices (25)
Precision Machine Vises (53)
106 itens
* Informações sobre dias de expedição, custos de expedição e preços
- Volume Discount
NABEYA
For cast parts, the tough cast iron body, the movable body, and the female thread are designed to maintain sufficient strength with a hard material cast under the quality control of a JIS factory. Heading is used for the stopper balls on both ends of the handle to prevent them from falling out. Features rubber rings attached on both ends of the handle on the inside to prevent hands and fingers from getting caught.Ler maisConfigurarPreço (excluindo IVA) a partir de:624.55 €Preço, incluindo IVA:743.21 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
Made of ductile FCD600, even stronger than cast steel, and has a 35% larger mouth opening. The movable part and main unit are ductile FCD600 which will not be damaged. The high-strength socket S15CK has undergone carburizing and has been machined into a U-shape with 3 set screws to prevent excessive loosening due to impacts from above.Ler maisConfigurarPreço (excluindo IVA) a partir de:2,781.88 €Preço, incluindo IVA:3,310.44 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
Machine vise handle.[Features]· Machine vise replacement part.· Optional part for the machine vise series.[Application]· Replacement handle for the machine vise.Ler maisConfigurarPreço (excluindo IVA) a partir de:77.96 €Preço, incluindo IVA:92.77 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
Vise Mounting Bolt Set【3 unidades】
Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.Ler maisConfigurarPreço (excluindo IVA) a partir de:21.72 €Preço, incluindo IVA:25.85 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:754.35 €Preço, incluindo IVA:897.68 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
[Features]· Made of fully quenched materials, this is a precision tool that is finished by polishing.· The accuracy is within 5 microns in both squareness and parallelism.· Each machine comes with a beautiful wooden box case.Ler maisConfigurarPreço (excluindo IVA) a partir de:1,732.03 €Preço, incluindo IVA:2,061.12 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
[Features]· Powerful angle vise.· High fastening force: internal processing of the main body is done by broaching so the load loss is low and high fastening force is achieved.· Highly durable: Tough cast iron and ductile parts are heavy duty, damage-resistant, and durable.· Easy lubrication and smooth operation.· Jaw portions are subjected to charcoal heat treatment with good durability; replacement is possible, allowing long vise service life.· Stopper balls have heading so they will not come off.· A turntable can be installed.Ler maisConfigurarPreço (excluindo IVA) a partir de:450.15 €Preço, incluindo IVA:535.68 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
Engineer's Vise Jaws (2 Pieces 1 Set)
[Features]A lead type vise · A sturdy heavy-duty lead type vise.A jaw plate (2 pcs./set) part.·Compatible vise: 75/100/125/150/200/250Ler maisConfigurarPreço (excluindo IVA) a partir de:58.53 €Preço, incluindo IVA:69.65 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:98.69 €Preço, incluindo IVA:117.44 €Data de envio regular:8 dias úteis
- Volume Discount
NABEYA
[Features]· The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.· S50C type hardened to HRC46-53 with improved wear resistance.· Comes inside a strong wooden storage case.· Also sold separately.· By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floatingLer maisConfigurarPreço (excluindo IVA) a partir de:634.87 €Preço, incluindo IVA:755.50 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
Maker's Vise Wedge Locking Tool
[Features]· The accuracy is higher than the former JIS 0 class.· Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.· Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.· Back surface has a guide block so precision can be easily improvedLer maisConfigurarPreço (excluindo IVA) a partir de:1,623.40 €Preço, incluindo IVA:1,931.85 €Data de envio regular:9 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:311.10 €Preço, incluindo IVA:370.21 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
Handle Joint for Lock-tight CV Precision Machine Vise
[Features]A component for Lock-Tight CV Precision Machine Vises.A handle joint.· RoHS compliant·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm·Compatible models: Common to all CV modelsLer maisConfigurarPreço (excluindo IVA) a partir de:69.41 €Preço, incluindo IVA:82.60 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
Lock-tight 5-Axis Machine Vise
Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Lock-tight lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.Ler maisConfigurarPreço (excluindo IVA) a partir de:2,444.24 €Preço, incluindo IVA:2,908.65 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Lock-tight lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.Ler maisConfigurarPreço (excluindo IVA) a partir de:3,279.95 €Preço, incluindo IVA:3,903.14 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
Lock-Tight Precision Machine Vise L Type
The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.Ler maisConfigurarPreço (excluindo IVA) a partir de:1,243.10 €Preço, incluindo IVA:1,479.29 €Data de envio regular:8 dias úteis- Volume Discount
NABEYA
FA Mouthpiece for Machine Vise
[Features]A standard fitting for Machine Vise Series.·Thread diameter: M8/M10/M12·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175QLer maisConfigurarPreço (excluindo IVA) a partir de:143.63 €Preço, incluindo IVA:170.92 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:67.85 €Preço, incluindo IVA:80.74 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.Ler maisConfigurarPreço (excluindo IVA) a partir de:442.66 €Preço, incluindo IVA:526.77 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.Ler maisConfigurarPreço (excluindo IVA) a partir de:570.30 €Preço, incluindo IVA:678.66 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
Lock-Tight CV Precision Machine Vise
The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.Ler maisConfigurarPreço (excluindo IVA) a partir de:1,879.82 €Preço, incluindo IVA:2,236.99 €Data de envio regular:8 dias úteis
- Volume Discount
NABEYA
Flat Jaw Plates for 5-Axis Machine Vise
[Features]A flat jaw plate for Lock-Tight 5-Axis Machine Vises.·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)Ler maisConfigurarPreço (excluindo IVA) a partir de:124.01 €Preço, incluindo IVA:147.57 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
[Features]A Joint bar for Lock-Tight MC Jig Vises.·Effective length: 0 mm / 150 mmLer maisConfigurarPreço (excluindo IVA) a partir de:65.13 €Preço, incluindo IVA:77.50 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
[Features]· Capable of easily clasping long objects that cannot be tightened with machine vises.· Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.· Convenient for processing of mass produced products.· Large opening depth.Ler maisConfigurarPreço (excluindo IVA) a partir de:1,037.96 €Preço, incluindo IVA:1,235.17 €Data de envio regular:8 dias úteis
- Volume Discount
NABEYA
The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.Ler maisConfigurarPreço (excluindo IVA) a partir de:125.51 €Preço, incluindo IVA:149.36 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.Ler maisConfigurarPreço (excluindo IVA) a partir de:8,750.37 €Preço, incluindo IVA:10,412.94 €Data de envio regular:9 dias úteis- Volume Discount
NABEYA
Lock-Tight CV Precision Machine Vise Jaws
Standard clamp for machining vise.Ler maisConfigurarPreço (excluindo IVA) a partir de:170.78 €Preço, incluindo IVA:203.23 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:96.73 €Preço, incluindo IVA:115.11 €Data de envio regular:8 dias úteis
- Volume Discount
NABEYA
Pull Down Vise Mouthpiece Coarse【2 unidades】
Standard clamp (coarse) for pull-down vise (free jaw vise).Ler maisConfigurarPreço (excluindo IVA) a partir de:99.33 €Preço, incluindo IVA:118.20 €Data de envio regular:11 dias úteis
- Volume Discount
NABEYA
Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.Ler maisConfigurarPreço (excluindo IVA) a partir de:2,781.89 €Preço, incluindo IVA:3,310.45 €Data de envio regular:9 dias úteis- Volume Discount
NABEYA
Lock-Tight Precision Machine Vise Jaws
Optional parts for the machining vise series.Ler maisConfigurarPreço (excluindo IVA) a partir de:143.63 €Preço, incluindo IVA:170.92 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
[Features]A component of Machine Vise Series · A mounting bolt.·Compatible vise: LT200M,LT250M,LT-HPD80E·Compatible slot width: 22 mm·Set contents: TNM2220 (T-slot nut), FNM0020 (flange nut), BM20100 (stud bolt)Ler maisConfigurarPreço (excluindo IVA) a partir de:80.31 €Preço, incluindo IVA:95.57 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
[Features]· The height is designed with the jaw depth of the vise in mind.· A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).· A 2-piece set.Ler maisConfigurarPreço (excluindo IVA) a partir de:171.08 €Preço, incluindo IVA:203.59 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:67.58 €Preço, incluindo IVA:80.42 €Data de envio regular:6 dias úteis- Volume Discount
NABEYA
FA Step Mouthpiece for Machine Vise
[Features]A step jaw plate for Machine Vise Series.·Thread diameter: M8/M10/M12·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175QLer maisConfigurarPreço (excluindo IVA) a partir de:170.78 €Preço, incluindo IVA:203.23 €Data de envio regular:8 dias úteis- Volume Discount
NABEYA
[Features]A JIS vise collar for horizontal vise parts.·Compatible vise: A75/A100/A125/A150Ler maisConfigurarPreço (excluindo IVA) a partir de:19.51 €Preço, incluindo IVA:23.22 €Data de envio regular:10 dias úteis- Volume Discount
NABEYA
JIS Vise Mouthpiece (2 Pieces 1 Set)
[Features]· JIS vise base (2-piece set) for side-vise partsLer maisConfigurarPreço (excluindo IVA) a partir de:92.84 €Preço, incluindo IVA:110.48 €Data de envio regular:6 dias úteis- Volume Discount
NABEYA
[Features]Guide bar parts for clamp master vise.Compatible models are EVS, ETS, EPA, ETPA-75-3 (EVS75-GB), EVS, ETS, EPA, ETPA-100-4 (EVS100-GB), EVS, EPA-150-6 (EVS150-GB), EVS200-8 (EVS200-GB).Ler maisConfigurarPreço (excluindo IVA) a partir de:57.35 €Preço, incluindo IVA:68.25 €Data de envio regular:13 dias úteis- Volume Discount
NABEYA
Clamp Master Vise Knob (Black)
[Features]Holding Ball part of clamp master vise (Black).Compatible models are EVS200-8.Ler maisConfigurarPreço (excluindo IVA) a partir de:48.27 €Preço, incluindo IVA:57.44 €Data de envio regular:13 dias úteis
- Volume Discount
NABEYA
Beta vise model A components for medium drilling machines.Ler maisConfigurarPreço (excluindo IVA) a partir de:46.20 €Preço, incluindo IVA:54.98 €Data de envio regular:8 dias úteis
- Volume Discount
NABEYA
One unit does the work of three. (1) Vise (2) Pipe/Vise (3) AnvilLer maisConfigurarPreço (excluindo IVA) a partir de:69.44 €Preço, incluindo IVA:82.63 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
[Features]· Can be mounted on your current vise with the magnet.· Can be used for any vise whether it is industrial or for do-it-yourself carpenters, machine vises, or work vises.Ler maisConfigurarPreço (excluindo IVA) a partir de:86.26 €Preço, incluindo IVA:102.65 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:41.63 €Preço, incluindo IVA:49.54 €Data de envio regular:6 dias úteis- ConfigurarPreço (excluindo IVA) a partir de:34.69 €Preço, incluindo IVA:41.28 €Data de envio regular:9 dias úteis
- Volume Discount
NABEYA
Woodwork Vise for School Teaching Material (Under Platform Type)
[Features]· A tool type that can be mounted on the top surface of a workbench.· The main body and movable parts are made of robust hard cast iron FC250.· Trapezoidal screws are used for powerful tightening.· Stopper balls are integrated casting, so they will not come off.· All parts are interchangeable and replaceable.Ler maisConfigurarPreço (excluindo IVA) a partir de:186.51 €Preço, incluindo IVA:221.95 €Data de envio regular:9 dias úteis