NACHI(FUJIKOSHI) Ball Bearings（Materials of Inner and Outer Ring：Steel）

[Features]· Ideal for bearing unidirectional axial loads.· Additionally, composite models are able to bear an axial load in both directions.· Does not support radial loads.· Self-aligning ball bearings with an aligning seat conformation can be used to correct mounting errors.· Bearings which employ a polyamide retainer contain a "G" at the end of the corresponding bearing number indicated on the packaging

[Features]· Two different contact angles are available for different axial load magnitudes and moment loads· Uses a punching cage· As with single row deep groove ball bearings, bearings with a seal (2NS), and shield (ZZ) included are also available[Applications]· Blower, high-speed vacuum pump receiver, supercharger, two-wheel vehicle transmission

[Features]· Three models are available for each contact angle ·Generally, for the cage bearing an "A" or "B" contact angle symbol, a carved cage made of copper alloy or synthetic resin at P5 or greater is used ·A "C" contact angle symbol is primarily used for P5 or greater high-precision bearings ·Uses a synthetic resin fly cutting or polyamide cage

Self-aligning feature makes this product ideal for cases in which axial deflection and inclination cannot be avoided. ·Small load capacity (especially the axial load capacity). ·If a higher load capacity is required, use a self-aligning roller bearing with the same alignment function. ·Models that use a polyamide cage are marker with a "G" at the end of the model number displayed on the product packaging