TIGERS POLYMER Resin Hoses
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Crystal Hose WT Type
TIGERS POLYMER
· Transparent with excellent flexibility. Well suited for suction use.
[Features]
· For water intake and drainage applications in agriculture, civil engineering work, etc.
· Since the outer surface is corrugated, flexibility is excellent.
･ Contents can be checked due to transparency.
· Well suited for suction useMin. Shipping Days ： 10 Days -
Crystal Hose E Type
TIGERS POLYMER
Smooth inner and outer surfaces, with grounding wire. Hose for Transporting Powder and Granules
[Features]
· Contains grounding wire, so an excellent antistatic effect is also conferred.
･ Contents can be checked since it is transparent.
· Suitable for delivery.Min. Shipping Days ： 10 Days -
Crystal Hose WA Type
TIGERS POLYMER
Excellent heat resistance and wear resistance. Contains hard steel wire, so an antistatic effect is also conferred.
[Features]
· Features excellent heat resistance and can withstand hot air at 100°C when piping is straight.
· Contains hard steel wire, so an excellent antistatic effect is also conferred.Min. Shipping Days ： 10 Days -
Crystal Hose, F-3 Type
TIGERS POLYMER
Lightweight, with flat and smooth inner/outer surfaces. Suitable for both delivery and suction.
[Features]
- The soft part is transparent, letting you see the contents.
- Lightweight and bendable for easy handling.
· Suitable for both suction and delivery.Min. Shipping Days ： 10 Days -
Tie Power Hose WS Type
TIGERS POLYMER
WT pressure resistant type. Lightweight with excellent flexibility.
[Features]
· For water intake and drainage performed in civil engineering work, etc.
· WT pressure resistant type.
· A reinforcing cord is included, conferring excellent pressure resistance.
· Lightweight and flexible.
· Well suited for delivery and suction use.
· WS type is right handedMin. Shipping Days ： 10 Days -
Thailand Power Hose WR-Type
TIGERS POLYMER
Maximum allowable pressure resistance of 1.0 MPa (10.2 kgf/cm2). (φ 300 is 0.50 Mpa) It boasts superior wear resistance thanks to special materials in its inner layer.
[Features]
▪ Maximum allowable pressure 1.0 Mpa {10.2 kgf/cm2}:It has excellent pressure resistance (with outer tube caulking/inner tube expansion fittings).
・Special enter layer materials provided with excellent abrasion resistance.
▪ Its ability to be lengthened can streamline piping work.Min. Shipping Days ： 10 Days -
Ti-Power Hose, FC-Type (Mortar Hose)
TIGERS POLYMER
With little expansion under pressurization, this hose has superior pressure-resistant performance. It has excellent abrasion resistance. Use of an inner cylinder expansion fitting smooths the inner surface, to smooth out the fluid flow.Min. Shipping Days ： 10 Days -
Crystal Hose, Static Electricity W Type
TIGERS POLYMER
Anti-static crystal hose WT type. Hose for transporting powder and granuals
[Features]
· Excellent anti-static effect from use of antistatic mixed PVC.
･ Soft portion is transparent, allowing confirmation of contentsMin. Shipping Days ： 10 Days -
Thailand Eco-Light Electrostatic W Type
TIGERS POLYMER
[Features]
・ Excellent antistatic effect due to antistatic compound material and conductive fiber.
・ It is an environmentally friendly hose because it does not contain chlorine or plasticizer. (It can be incinerated)
・ Due to the corrugated structure, it is flexible, lightweight and easy to handle.
・ It conforms to the standards for appliances and containers and packaging based on Notification No. 201 of the Food Sanitation Act of Japan, Ministry of Health, Labour and Welfare of Japan. (Excluding fats and oils)
[Applications]
・ Transport of plastic pellets.
・ Transport of other powders and granules.
・ For food. (Excluding fats and oils)Min. Shipping Days ： 10 Days -
Hinet Holes
TIGERS POLYMER
[Features]
・ The excellent transparency makes it easy to check the fluid.
・ The warp thread is inserted to suppress the elongation during pressurization.
・ It has excellent cold resistance, heat resistance, and chemical resistance.
[Applications]
・ For water supply and drainage of equipment.
・ For pneumatic, air conditioner piping and drainage.
・ For cleaning ships, vehicles, etc.
・ For transporting powders and liquid chemicals.
・ Sprayer.
・ For civil engineering and construction work piping.Min. Shipping Days ： 10 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Fluid / Usage |
| Cutting Service Usage |
| Nominal I.D. d |
| O.D. D(mm) |
| Properties |
| Hose Material |
| Mounting Metal Fittings |
| Color |
|
|
|
|
|
|
|
|
|
| |
| Brand | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER |
| Product Series | ||||||||||
| Starting from∗ | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days |
| Applicable Fluid / Usage | Water | Powder | Powder / Special factory requirements | Water | Water | Water | Cement | Powder | Powder / Special factory requirements | Water / Chemical / Powder / Air |
| Cutting Service Usage | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Nominal I.D. d | 25 ～ 200 | 50 | 38 ～ 200 | 19 ～ 200 | 25 ～ 200 | 38 ～ 200 | 50 | 25 ～ 75 | 25 ～ 75 | 4 ～ 50 |
| O.D. D(mm) | 31.6 ～ 229.7 | 61 | 48 ～ 230 | 24.5 ～ 221.5 | 34.4 ～ 235 | 52.3 ～ 245 | 65 | 31.8 ～ 90 | 33 ～ 91 | 9 ～ 62 |
| Properties | Standard / Transparency / Flexibility / Vacuum | Antistatic Performance / Transparency | Antistatic Performance / Abrasion Resistance / Heat Resistance | Standard / Transparency / Flexibility / Vacuum | Standard / Pressure Resistance / Flexibility / Vacuum | Abrasion Resistance / Pressure Resistance | Abrasion Resistance / Pressure Resistance | Antistatic Performance / Transparency | Antistatic Performance / Flexibility | Heat Resistance / Low Temp. Resistance / Chemical Resistance / Transparency |
| Hose Material | Vinyl Chloride | Vinyl Chloride | Ethylene Propylene Rubber | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Elastomer | Vinyl Chloride |
| Mounting Metal Fittings | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Color | Transparent (including non-white colors) | Transparent (including non-white colors) | Black | Transparent (including non-white colors) | Rose | Orange | Gray | Transparent (including non-white colors) | White | Transparent (including non-white colors) |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Fluid / Usage
-
Cutting Service Usage
- Yes
- No
-
Nominal I.D. d
-
O.D. D(mm)
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 10.5
- 10.6
- 11
- 11.7
- 11.7/11.7
- 12
- 12.3
- 12.5
- 13
- 13.5
- 14
- 14.3
- 14.5
- 14.5/16.0
- 15
- 16
- 16.5
- 17
- 18
- 19
- 19.5
- 20
- 20.1
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.7
- 25
- 25.6
- 26
- 27
- 27.5
- 28
- 28.2
- 28.5
- 29
- 29.9
- 30
- 30.4
- 30.8
- 30.9
- 31
- 31.2
- 31.5
- 31.6
- 31.8
- 32
- 32.6
- 32.9
- 33
- 33.4
- 33.5
- 33.7
- 33.8
- 34
- 34.2
- 34.4
- 34.5
- 34.9
- 35.5
- 35.6
- 36
- 36.5
- 36.7
- 37
- 37.4
- 37.6
- 38
- 38.2
- 39
- 39.2
- 39.3
- 39.8
- 40
- 40.2
- 40.5
- 40.8
- 41
- 41.5
- 41.6
- 41.8
- 42
- 42.5
- 43
- 43.2
- 43.5
- 43.8
- 43.9
- 44
- 44.4
- 44.6
- 45.5
- 45.8
- 46
- 46.2
- 46.4
- 46.5
- 46.6
- 47.0
- 47.2
- 47.5
- 47.6
- 47.8
- 48
- 48.4
- 48.5
- 48.7
- 48.8
- 49.5
- 50
- 50.1
- 50.5
- 50.7
- 51
- 52
- 52.3
- 53
- 55
- 56
- 57.0
- 57.5
- 58
- 58.2
- 58.5
- 58.6
- 59.5
- 59.7
- 59.8
- 60
- 60.2
- 60.5
- 60.9
- 61
- 61.4
- 61.6
- 62
- 62.6
- 62.8
- 63
- 63.4
- 63.5
- 64.5
- 65
- 65.2
- 66.0
- 66.8
- 68
- 69.3
- 69.5
- 69.7
- 70
- 71.0
- 71.5
- 72
- 72.1
- 72.2
- 72.4
- 72.6
- 73
- 73.6
- 73.9
- 74
- 74.1
- 74.6
- 74.8
- 75
- 75.1
- 76.0
- 76.5
- 76.8
- 77
- 78
- 78.5
- 78.9
- 80
- 80.5
- 81.5
- 84
- 84.8
- 85.1
- 86
- 86.3
- 86.6
- 87.0
- 87.5
- 87.6
- 88.0
- 88.8
- 89
- 89.1
- 89.6
- 89.8
- 90
- 90.2
- 90.8
- 91
- 91.4
- 92
- 93.3
- 95.5
- 99.1
- 99.5
- 99.7
- 100.5
- 101
- 102.0
- 102.8
- 104
- 104.2
- 104.3
- 105.2
- 106.0
- 107
- 108
- 111.6
- 112.0
- 112.3
- 112.6
- 113
- 114
- 115
- 115.2
- 115.8
- 117
- 117.2
- 117.6
- 118
- 118.4
- 118.6
- 119
- 119.5
- 120
- 120.5
- 128
- 129
- 131.8
- 137.9
- 139.5
- 140
- 140.6
- 141.6
- 143
- 143.6
- 144.8
- 146.8
- 148
- 151
- 152
- 152.2
- 152.5
- 159.5
- 167.5
- 168.0
- 169.4
- 169.8
- 171.0
- 172.0
- 173
- 173.6
- 174.7
- 180
- 180.5
- 183.5
- 184.5
- 197.8
- 221.5
- 223.4
- 223.8
- 226.4
- 226.5
- 229.7
- 230
- 233.5
- 235
- 237
- 238.0
- 245
- 274
- 286.0
- 295.0
- 328.5
- 347.0
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Weather Resistance
- Pressure Resistance
- Heat Resistance
- Low Temp. Resistance
- Oil Resistance
- Chemical Resistance
- Low Release
- Non-adhesive
- Transparency
- Flexibility
- Low Odor
- Condensation Prevention
- Shape Retention
- High Strength
- Vacuum
- Bending Property
- Other Properties
-
Hose Material
- Polyurethane
- Vinyl Chloride
- Silicon Rubber
- Fluororesin
- Olefinic Resin
- Polyolefinic Resin + Styrene Resin
- Others
- Elastomer
- Ethylene Propylene Rubber
- Nylon
-
Mounting Metal Fittings
-
Color
Narrow search by specifying Brand
-
- MISUMI (7)
- KURARAYPLASTICS (27)
- TOYOX (27)
- TOGAWA INDUSTRY (26)
- HAKKO (17)
- TOTAKU INDUSTRIES (14)
- PLAS-TECH (11)
- TIGERS POLYMER (10)
- PREVOST (7)
- CHIYODA TSUSHO (6)
- KANAFLEX CORPORATION (6)
- TRUSCO NAKAYAMA (6)
- HELLERMANN TYTON (4)
- SHINSUNG (3)
- NORELEM (2)
- TRU COMPONENTS (1)
- DSG CANUSA (1)
- ESCO (1)
- SANYO KASEI (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Resin Hoses
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.