WIHA Testers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Continuity Tester 400 V AC, CAT II, Including 2 x AAA Batteries
WIHA
Simplifies your work: Simple testing thanks to LED display and signal sound.
Simplifies your work: An integrated flashlight function ensures optimal illumination.
Increases your flexibility: Quick continuity test up to 20 mA tested current and two large resistance ranges up to 10 Ω and up to 500 kΩ.
Dimensions: 9.0 x 7.5 cm
Application: For testing electrical connections, components, and equipment.
Standards: CAT II 400V
Was the installation carried out correctly? With the continuity tester from Wiha, electrical circuits and electrical consumers can be quickly and easily tested for continuity. Thanks to a signal sound and LED display the continuity measurement is easy to read. If the device is not in use for 30 seconds, it automatically switches off to save energy. In addition, the continuity tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit working environments. Both in the area of tested current and in various resistance areas, the continuity tester from Wiha offers reliable test results coupled with maximum safety according to CAT II up to 400 V.
EN 61010-1, IP40, CE
Starting from∗ ： 42.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Voltage and Continuity Tester, 12 - 1,000 V AC, CAT IV, Including 2 x AAA Batteries
WIHA
Simplifies your work: Quick one-hand testing on power sockets due to the 19 mm contact distance.
Simplifies your work: An integrated flashlight function ensures optimal illumination.
Meets your requirements: Checking the FI trigger by means of two load buttons.
Dimensions: 240 x 75 x 30 mm
Application: To determine zero voltage.
Application: For standardized voltage testing, continuity testing, rotational field testing incl. FI protective switch measurement.
Standards: CAT II 1.000V / CAT IV 600V
Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the various requirements in your daily work. It allows voltage testing of a convenient range from 12 V to 1,000 V AC or 1,500 V DC. In addition, it can be used for continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection. LED display ensures easy to read measurement results. An additional signal sound indicates the current flow during the continuity check. The check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. In addition, the voltage tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load. According to the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations.
For applications in electrics
IEC 61243-3:2014, IP64, CE
Starting from∗ ： 75.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Digital Multimeter, up to 1,000 V AC, CAT IV, Including 2 x AAA Batteries
WIHA
Simplifies your work: Effective values due to True RMS function facilitate the right application.
Increases your efficiency: Quick result finding based on minimum and maximum values.
Simplifies your work: Large LCD display with bar graph and background illumination as well as signal sound for easy to read measurement results.
Makes handling easier: Automatic measuring range setting saves the manual pre-selection.
Simplifies your work: Simplifies storage and relative value measurement and expedites the comparison of measured values.
Dimensions: 150 x 80 x 45 mm
Application: For multi-functional use in different application locations.
Standards: CAT III 1000V / CAT IV 600V
Are you looking for a multimeter that covers the relevant measurement variables needed during the workday of an electrician? The digital multimeter from Wiha optimally equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. The additional bar graph display ensures the quick and clear recognition of changes. An additional signal sound indicates the current flow during the continuity check. Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. The Measurement of TRUE-RMS values facilitates the application of the measurement results. The storage of previous measurement values and their comparison to future measurement results allows various control options. Add to this optimal result finding through the generation of minimum and maximum values. According to the measurement categories CAT III up to 1000 V AC and CAT IV up to 600 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations.
EN 61010-1, EN 61010-2-033, EN 61010-031, IP40, CE
Starting from∗ ： 170.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Digital Multimeter, up to 600 V AC, CAT IV, Including 2 x AAA Batteries
WIHA
Increases your efficiency: All relevant measurement functions in a single measuring device.
Makes handling easier: Automatic measuring range setting saves the manual pre-selection.
Simplifies your work: Simplifies storage and relative value measurement and expedites the comparison of measured values.
Dimensions: 150 x 80 x 45 mm
Application: For multi-functional use in different application locations.
Standards: CAT III 600V / CAT IV 300V
Are you looking for a multimeter that covers the relevant measurement variables needed during the workday of an electrician? The digital multimeter from Wiha optimally equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible. A large LCD display makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. The relative value measurement offers another advantage. The storage of previous measurement values and their comparison to future measurement results allows a variety of control options. According to the measurement categories CAT III up to 600 V and CAT IV up to 300 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations.
EN 61010-1, EN 61010-2-033, EN 61010-031, IP 40, CE, GS
Starting from∗ ： 120.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Single-Pole, Non-Contact Volt Detector, 12–1,000 V AC, Including 2 x AAA Batteries
WIHA
Saves time: Rapid voltage test thanks to contactless measuring.
Increases your efficiency: Compatible for use in all sockets worldwide thanks to measurement tip suited to international usage.
Increases your efficiency: Integrated powerful LED flashlight.
Increases your flexibility: The voltage tester covers a large voltage range from 12 - 1,000 V AC.
Application: Used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.
Standards: CAT IV 1.000 VAC
Before starting electrical installation work, electricians need to guarantee that their work environment is free of any live voltage. A voltage tester is required to test alternating electric fields or probable sources of error. The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates that the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field. Two AAA batteries are required to operate the device. These are included in the delivery. The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size. The voltage tester is suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1/IEC 61326.
For applications in electrics
The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly.
EN 61010-1, IEC 61326, IP67
Starting from∗ ： 33.87 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Single-Pole, Non-Contact Volt Detector, 90–1,000 V AC, Including 2 x AAA Batteries
WIHA
Saves time: Rapid voltage test thanks to contactless measuring.
Increases your efficiency: Compatible for use in all sockets worldwide thanks to measurement tip suited to international usage.
Application: Used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.
Standards: CAT IV 1.000 V
Before starting electrical installation work, electricians need to guarantee that their work environment is free of any live voltage. A voltage tester is required to test alternating electric fields or probable sources of error. The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical signal. Once the tester is switched on, the permanently green LED indicates that the tester is ready for use. If a voltage is detected, the red LED lights up, which can also be easily seen in daylight. Two AAA batteries are required to operate the device. These are included in the delivery. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size. The voltage tester is suitable for all socket variants worldwide thanks to its measurement tip adapted to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1/IEC 61326.
For applications in electrics
The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly.
EN 61010-1, IEC 61326, IP67
Starting from∗ ： 19.27 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Single-Pole, Non-Contact Voltage Tester Volt Detector, Explosion Protected, 12-1,000 V AC, Including 2 x AAA Batteries
WIHA
Increases your efficiency: Integrated powerful LED flashlight.
Saves time: Rapid voltage test thanks to contactless measuring.
Increases your flexibility: The voltage tester covers a large voltage range from 12 - 1,000 V AC.
Increases your efficiency: Compatible for use in all sockets worldwide thanks to measurement tip suited to international usage.
Application: For the detection and localization of live conductors, cable interruptions and cable breaks, blown fuses, defective lamps on light strings, as well as detection of individual wires.
Prior to the start of electrical installations, electricians must ensure that the work environment is voltage free. A voltage tester is needed for testing alternating electrical fields or detecting potential error sources. Thanks to its optical and acoustic signal, the non-contact Wiha voltage tester indicates whether or not there is any voltage. After switching on, the permanently green illuminated LED indicates readiness. During the voltage test, depending on the strength of the electrical alternating field, the LEDs are illuminated from blue (weak), 'to' orange, to red (strong). Two AAA batteries are required for use, which are included in the scope of delivery. If the device is not in use for 4 minutes, it switches off automatically to save energy. An integrated LED flashlight allows illumination of the measurement site in the dark and can also be used as a flashlight by manually switching it on and off. Thanks to its convenient size the voltage tester with push-on clip fits comfortably in any shirt or pant pocket. With its internationally adjustable measuring tip, the voltage tester is suitable for all outlet variations around the world. The single-pole voltage tester complies with the EN 61010-1 / IEC 61326 standard and is compatible with CAT IV 1,000 VAC. Furthermore,the tool is approved according to the ATEX standard for use in explosive areas (category II).
For applications in electrics
The device should be tested on a known voltage source before and after use to ensure its functionality.
EN 61010-1, IEC 61326, IP67
Starting from∗ ： 51.31 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Voltage and Continuity Tester, 0.5 - 1,000 V AC, CAT IV, Including 2 x AAA Batteries
WIHA
Increases your flexibility: Covers the relevant voltage range for the work of an electrician.
Simplifies your work: Large LCD display with background illumination, LED scale and signal sound for easy to read measurement results.
Simplifies your work: An integrated flashlight function ensures optimal illumination.
Meets your requirements: Checking the FI trigger by means of two load buttons.
Dimensions: 240 x 75 x 30 mm
Application: To determine zero voltage.
Application: For standardized voltage testing, continuity testing, rotational field testing and resistance testing incl. FI protective switch measurement.
Standards: CAT III 1.000V / CAT IV 600V
Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the various requirements in your daily work. It allows voltage testing of an extensive range from 0.5 V to 1,000 V AC or 1,500 V DC. In addition, the voltage tester can be used for continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection. Plus, resistance measurements and frequency measurements can also be conducted. Thanks to a large digital LCD display with background illumination and an LED display, the measurement results are immediately readable. An additional signal sound indicates the current flow during the continuity check. The check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. In addition, the voltage tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load. According to the measurement categories CAT III up to 1000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations.
For applications in electrics
IEC 61243-3:2014, IP64, CE
Starting from∗ ： 99.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Voltage Tester 150-250 Volts, Slotted Black, with Push-on Clip
WIHA
Application: For determining alternating voltages in low voltage range up to 250 volts with respect to earth potential.
Application: Suitable for trade and industry professionals.
Handle: Black with clip.
Blade: Chrome-vanadium steel, through hardened, black-finish.
Starting from∗ ： 9.17 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Voltage Tester 220-250 Volts, Slotted Transparent, with Push-on Clip
WIHA
Application: For determining alternating voltages in low voltage range up to 250 volts with respect to earth potential.
Application: Suitable for trade and industry professionals.
Blade: Acier chrome-vanadium, through-hardened, nickel-coated.
Starting from∗ ： 3.04 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Voltage Tester SoftFinish® Single-Pole, 110-250 Volts, Slotted Transparent, with Push-on Clip
WIHA
Increases your efficiency: Stable and as robust as a fully-fledged screwdriver.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For determining alternating voltages in low voltage range up to 250 volts with respect to earth potential.
Suitable for trade and industry professionals.Application: Suitable for trade and industry professionals.
Material: Chrome-vanadium-molybdenum steel, nickel-plated
Tested according to DIN 57680-6, GS, CE compliant.
Starting from∗ ： 8.72 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
Loading...
Categories related to Testers
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.