Equipment Castors (página 9)

• 

  BLICKLE

  Stainless Steel Swivel Castor, LEXR-TPA Series

  Stainless Steel Swivel Castor, with Bolt Hole Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel CentreBracket: LEXR serieshigh-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishingdouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processall parts including axle material are corrosion-resistantWheel: TPA seriestread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containingwheel centre: high-quality polypropylene, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	102 ～ 235	35.01 to 80.00 / 80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  63.99 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-G Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Cast Iron WheelBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: G seriesrugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silverOther features:chemical resistance to many aggressive substancesconsider the surface pressure on sensitive floors due to high point loadsprovide adequate lubrication on a regular basis for plain bore versionto be lubricated according to the application temperature

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	102 ～ 235	140.01 to 220.00 / 320.01 to 485.00	-	Others	-	-	-

  Preço (excluindo IVA) a partir de:

  35.26 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-GTH Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, with Dead Man’S Brake, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: GTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: rugged grey cast iron, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °Coperating angle: max. 38°torque required to release the brake: < 10 Nmbraking force: > 400 NBraking can place swivel castors under a significant amount of additional stress, depending on the mass which needs to be braked. We recommend using an additional safety factor of 2.0–3.0 when designing the vehicle / chassis.

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	165	320.01 to 485.00	-	Others	-	-	-

  Preço (excluindo IVA) a partir de:

  610.25 €

  Data de envio regular:

  23 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LH-ALBS Series

  Pressed Steel Swivel Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel CentreBracket: LH seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top platedouble ball bearing in the swivel headbolted and secured central kingpin, extremely strongparticularly resistant to shocks and impact due to four specially-shaped, hardened bearing seatsWheel: ALBS seriestread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	120 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Aluminum	Antistatic / Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  131.10 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LH-G Series

  Pressed Steel Swivel Castor, Heavy Duty Design, with Top Plate Fitting, Cast Iron WheelBracket: LH seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top platedouble ball bearing in the swivel headbolted and secured central kingpin, extremely strongparticularly resistant to shocks and impact due to four specially-shaped, hardened bearing seatsWheel: G seriesrugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silverOther features:chemical resistance to many aggressive substancesconsider the surface pressure on sensitive floors due to high point loadsto be lubricated according to the application temperature

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	120 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Others	-	-	-

  Preço (excluindo IVA) a partir de:

  87.59 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LH-GSPO Series

  Pressed Steel Swivel Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel Made of Compressed Cast NylonBracket: LH seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top platedouble ball bearing in the swivel headbolted and secured central kingpin, extremely strongparticularly resistant to shocks and impact due to four specially-shaped, hardened bearing seatsWheel: GSPO serieshigh-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beigeOther features:high chemical resistance to many aggressive substancesreduced moisture absorptionoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °Cconsider the surface pressure on sensitive floors due to high point loads

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	97 ～ 219	485.01 to 750.00 / 750.01 or More	-	Engineering Plastics	-	-	-

  Preço (excluindo IVA) a partir de:

  113.30 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LH-GST Series

  Pressed Steel Swivel Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: LH seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top platedouble ball bearing in the swivel headbolted and secured central kingpin, extremely strongparticularly resistant to shocks and impact due to four specially-shaped, hardened bearing seatsWheel: GST seriestread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-stainingwheel centre: rugged grey cast iron, with grease nipple from wheel Ø 160 mm, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	140 ～ 295	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Others	-	-	-

  Preço (excluindo IVA) a partir de:

  232.09 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LIK-POH Series

  Pressed Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Nylon WheelBracket: LIK seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headswivel head play is set specifically for high-temperature applicationshighly heat-resistant greaseWheel: POH serieshighly heat-resistant nylon, impact resistant, hardness 85 Shore D, colour naturalOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +170 °Coven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °CLoad capacity may be reduced in temperatures over +70 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	130 ～ 155	220.01 to 320.00 / 320.01 to 485.00	-	Engineering Plastics	Heat Resistance	-	-

  Preço (excluindo IVA) a partir de:

  68.62 €

  Data de envio regular:

  23 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LI-PHN Series

  Pressed Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Blickle Templine® Classic Thermoset Wheel, Heat-ResistantBracket: LI seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinsmooth rolling characteristic and low wear, increased service lifeswivel head play is set specifically for high-temperature applicationshighly heat-resistant greaseWheel: PHN seriesphenolic resin, hardness 90 Shore D, colour blackOther features:high chemical resistance to many aggressive substancesoperating temperature: -35 °C to +260 °Cwheels are only conditionally suitable for uneven floors and crossing thresholds

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	102 ～ 235	80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00	-	Engineering Plastics	Heat Resistance	-	-

  Preço (excluindo IVA) a partir de:

  41.10 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Synthetic Twin Wheel Swivel Castor, LKDB-PUA Series

  Synthetic Twin Wheel Swivel Castor, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel CentreBracket: LKDB serieshigh-quality nylon 6, impact resistanthigh-quality synthetic plain bore in the swivel headcolour black RAL 9005Wheel: PUA seriestread: high-quality thermoplastic polyurethane (TPU), hardness 92 Shore A, colour black, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour black RAL 9005Other features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +80 °C, reduced load capacity over +30 °CCastors are not approved for office chairs.

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	66 ～ 245	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics / Others	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  9.88 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LKPA-PATH Series

  Light Duty Swivel Castor, with Top Plate Fitting Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre, LKPA-PATH SeriesBracket: LKPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: PATH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	73 ～ 185	80.01 to 140.00	-	Engineering Plastics	-	-	-

  Preço (excluindo IVA) a partir de:

  26.46 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LKPA-TPA Series

  Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LKPA-TPA SeriesBracket: LKPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: TPA seriestread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containingwheel centre: high-quality polypropylene, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	111 ～ 161	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  22.62 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LKPA-VPA Series

  Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LKPA-VPA SeriesBracket: LKPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: VPA seriestyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-stainingrim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	73 ～ 185	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  23.98 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LK-POTH Series

  Pressed Steel Swivel Castor, Heavy Duty Design, Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel CentreBracket: LK seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 125x50 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POTH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour natural whiteOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	108 ～ 262	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Preço (excluindo IVA) a partir de:

  50.19 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LK-POW Series

  Pressed Steel Swivel Castor, Heavy Duty Design, Nylon Wheel, with Rubber Damping Ring, Low Noise, with Synthetic Thread GuardBracket: LK seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 125x50 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POW serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour whitelow-noise operation (-10 decibels) with elastic cushion layer made from elastic solid rubber, colour redOther features:with synthetic thread guard, largehigh chemical resistance to many aggressive substancesoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	111 ～ 161	140.01 to 220.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  51.41 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LKRA-PATH Series

  Light Duty Swivel Castor, with Bolt Hole Fitting Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel CentreBracket: LKRA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: PATH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	108 ～ 161	80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  25.75 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LKRA-POA Series

  Light Duty Swivel Castor, with Bolt Hole Fitting, Nylon Wheel, LKRA-POA SeriesBracket: LKRA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POA serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour blackOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	70 ～ 185	80.01 to 140.00	-	Engineering Plastics	-	-	-

  Preço (excluindo IVA) a partir de:

  18.70 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Twin Wheel Swivel Castor, LMDA-POA Series

  Light Duty Twin Wheel Swivel Castor, Nylon WheelBracket: LMDA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headpressed swivel headWheel: POA serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour blackOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	71 ～ 98	35.01 to 80.00 / 80.01 to 140.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  10.87 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, LO-ALST Series

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel CentreBracket: LO seriessolid welded steel construction, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headfour specially-shaped, hardened bearing seats for additional strengthbolted and secured welded central kingpin, extremely strongswivel head seal with labyrinth designgrease nippleWheel: ALST seriestread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	170 ～ 295	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Aluminum	Antistatic	-	-

  Preço (excluindo IVA) a partir de:

  243.53 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-P Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Wheel, with Pneumatic Tyre, with Pressed Steel RimBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: P seriestyre: pneumatic tyre, hardness 60 Shore A, colour grey, non-marking, 2-ply ratingrim: pressed steel, with welded tubular steel hub, zinc-plated, blue-passivated, Cr6-freeswivel castors with brakes lose brake force if the tyre pressure is too lowOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +50 °Cthe wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. Their width and diameter may change when they are in use.speeds up to 16 km/h possible for wheels with ball bearing and reduced load capacity

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	52 ～ 308	35.01 to 80.00 / 80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00	-	Steel	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  86.13 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LPA-POA Series

  Light Duty Swivel Castor, with Top Plate Fitting, Nylon Wheel, LPA-POA SeriesBracket: LPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POA serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour blackOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	125 ～ 150	35.01 to 80.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  7.74 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LPA-VPA Series

  Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LPA-VPA SeriesBracket: LPA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: VPA seriestyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-stainingrim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	52 ～ 255	Up to 35.00 / 35.01 to 80.00	-	Engineering Plastics	Antistatic / Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  9.77 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Heavy Duty Swivel Castor, LPFE-ALEV Series

  Heavy Duty Swivel Castor, with Polyurethane Torsion Spring, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Aluminium Wheel CentreBracket: LPFE seriessolid welded steel construction, solid forged part, zinc-plated, yellow-passivated, Cr6-freepatented woodruff key design for outstanding spring-damping propertiesone sealed lifetime lubricated grooved ball bearing in the swivel head (two for wheel Ø 125x50 mm or more)Wheel: ALEV seriestyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour blackwheel centre: die-cast aluminiumOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	125 ～ 255	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00	-	Aluminum	Antistatic / Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  269.61 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-POEV Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Nylon Wheel CentreBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POEV seriestyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour blackwheel centre: high-quality nylon 6, impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	102 ～ 295	80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Preço (excluindo IVA) a partir de:

  30.72 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-POTH Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel CentreBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: POTH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour natural whiteOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	125 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Preço (excluindo IVA) a partir de:

  39.47 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, L-PP Series

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Polypropylene Wheel, L-PP SeriesBracket: L seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpin (from wheel Ø 150 mm)swivel head sealminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: PP serieshigh-quality polypropylene, impact resistant, hardness 60 Shore D, colour blackOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	102 ～ 235	80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  23.31 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LRA-PATH Series

  Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel CentreBracket: LRA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: PATH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	69 ～ 124	35.01 to 80.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  8.18 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Light Duty Swivel Castor, LRA-TPA Series

  Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LRA-TPA SeriesBracket: LRA seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: TPA seriestread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containingwheel centre: high-quality polypropylene, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	69 ～ 124	Up to 35.00 / 35.01 to 80.00	-	Engineering Plastics	Conductivity	-	-

  Preço (excluindo IVA) a partir de:

  7.40 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Compact Swivel Castor, LR-VSTH Series

  Pressed Steel Compact Swivel Castor, with Bolt Hole, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel CentreBracket: LR seriespressed steel, zinc-plated, blue-passivated, Cr6-freedouble ball bearing in the swivel headstrong central kingpinminimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting processWheel: VSTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: steelOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	72	140.01 to 220.00	-	Steel	-	-	-

  Preço (excluindo IVA) a partir de:

  76.29 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, LS-GEV Series

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Elastic Solid Rubber Tyre, with Cast Iron Wheel CentreBracket: LS seriesparticularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-freeaxial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel headbolted and secured welded central kingpin, extremely strongdust and splash-proofgrease nippleWheel: GEV seriestyre: high-quality elastic solid rubber in smooth rolling quality, hardness 65 Shore A, colour blackwheel centre: rugged grey cast iron, with grease nipple, lacquered, colour anthraciteOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	-	170 ～ 205	Up to 35.00	-	Others	-	-	-

  Preço (excluindo IVA) a partir de:

  843.50 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  BLICKLE

  Pressed Steel Swivel Castor, LUH-POEV Series

  Pressed Steel Swivel Castor, Enclosed Design, with Top Plate Fitting Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Nylon Wheel CentreBracket: LUH seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freefour-point ball bearing for extremely heavy loadsenclosed and sealed swivel headparticularly resistant to shocks and impact due to specially-shaped, hardened bearing seatsWheel: POEV seriestyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour blackwheel centre: high-quality nylon 6, impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	-	170 ～ 245	320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Preço (excluindo IVA) a partir de:

  174.02 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  NORELEM

  Fixed castors (95012)

  · Sprockets with plain bearing· Steel plate housing· Polyamide rim· Solid rubber tread, shock- and impact-resistant

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Fixed	-	111 ～ 161	-	-	Rubber	-	Steel	-

  Preço (excluindo IVA) a partir de:

  23.07 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Fixed castor, electrically conductive (95016)

  · For protection from electrostatic charge · Swivel castor housing with 2x ball bearing · Wheels with plain bearing · Steel plate housing· Solid rubber tread, trackless

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Fixed	-	102 ～ 235	-	-	Others	-	Steel	-

  Preço (excluindo IVA) a partir de:

  26.01 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Swivel castor with stop fix, electrically conductive (95016)

  · For protection from electrostatic charge· Swivel castor housing with double ball bearing· Sprockets with plain bearing· Steel plate housing· Solid rubber tread, trackless

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	102 ～ 235	-	-	Others	-	Steel	-

  Preço (excluindo IVA) a partir de:

  49.05 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Swivel castors (95024)

  · Swivel castor housing with double ball bearing· Sprockets with plain bearing· Steel plate housing· Polyamide rim· Polyurethane tread, trackless

  Ler mais

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	125 ～ 235	-	-	Polyurethane	-	Steel	-

  Preço (excluindo IVA) a partir de:

  42.96 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount
  • Stock

  MISUMI

  Screw-In Caster Light Duty CNGN□

  [Features] Threaded wheel for light duty. -The wheel material is synthetic rubber (standard).

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	59 ～ 96	Up to 35.00 / 35.01 to 80.00	Not Provided / With Rotation Stopper	Synthetic Rubber	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  1.75 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount
  • Order quantities extended (D-JIT)

  MISUMI

  Screw-In Caster Light/Medium Duty CMGN□

  [Features] Threaded castor for light to medium duty use. -The wheels are made of synthetic rubber (standard), nylon and urethane.

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	97 ～ 134	35.01 to 80.00 / 80.01 to 140.00	Not Provided / With Rotation Stopper	Synthetic Rubber / Nylon / Urethane	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  5.42 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount
  • Order quantities extended (D-JIT)
  • Stock

  MISUMI

  Castors / Double Wheel Type / Stainless Steel

  [Features] The double wheel structure of the wheels gives this castor high rotation performance during travel.

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Dual Wheels	-	75 ～ 102	320.01 to 485.00 / 485.01 to 750.00	Not Provided	Nylon	Antistatic / Not Provided	Stainless Steel	-

  Preço (excluindo IVA) a partir de:

  143.56 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  MISUMI

  Castors for Clean Environment / Plate Type with Swivel

  [Features] This roller is designed for clean rooms and uses a low dusting grease.

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type	-	118 ～ 134	35.01 to 80.00 / 80.01 to 140.00	Not Provided	Nylon / Urethane	Antistatic / Not Provided	Stainless Steel	-

  Preço (excluindo IVA) a partir de:

  168.76 €

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  Cast Castors / Swivel Type

  [Features] A durable cast iron reel for outdoor transport and other applications. -Standard type and drag type are available.

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Plate Type Fixed	-	112.5 ～ 350	35.01 to 80.00 / 80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	Not Provided	Synthetic Rubber / Urethane / Steel	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  15.75 €

  Data de envio regular:

  10 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  Design Castors / Plate Type【4 unidades】

  [Features] A swivel castor with excellent design for simple platform trolleys (4 pieces included).

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Screw-In Type / Dual Wheels	-	58 ～ 74	80.01 to 140.00	Not Provided / With Rotation Stopper	Nylon	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  21.16 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  Castors / Swivel / Locking / Economy

  It is a caster that can lock the turning by turning the lever ON/OFF. * Wheel stopper is not attached

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel	-	144 ～ 198	80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00	With Swivel Stopper	Synthetic Rubber / Nylon / Urethane	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  28.34 €

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  MISUMI

  Castors with Adjustment Pads / Lightweight Type

  [Features] A caster with an adjuster that is lightweight and improves safety.

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  With Leveling Mounts	-	75 ～ 98	35.01 to 80.00	Not Provided	Nylon	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  15.23 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount
  • Order quantities extended (D-JIT)
  • Stock

  MISUMI

  Caster, Light/Medium Duty CHAM□-E

  [Features] Roll for light to medium duty use. [Material] It is EN 1.0320 Equiv. (hot rolled).

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Plate Type Swivel / Plate Type Fixed	-	65 ～ 122	Up to 35.00 / 35.01 to 80.00	Not Provided / With Rotation Stopper	Synthetic Rubber / Nylon / Urethane	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  2.39 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount
  • Order quantities extended (D-JIT)

  MISUMI

  Screw-In Caster Light Duty CSTUN□

  [Features] Threaded castors for easy tasks. -The wheels are made of nylon, urethane and elastomer.

  Ler mais

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	74 ～ 97	35.01 to 80.00	Not Provided / With Rotation Stopper	Rubber	Not Provided	Steel	-

  Preço (excluindo IVA) a partir de:

  5.63 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar