Washers / Sleeves (Rubber, Caoutchouc, Foam, Felt) (Hardness (shore, asker): Shore A68)

At MISUMI, you will find highly configurable round rubber washers, rubber buffers and sleevesin many geometric designs that can be customized to your needs.
Use our configurator to preselect your individual industrial rubber dampers, bumpers and washers. Do you need help? Here you will find useful tutorials for using our configurator.

In the MISUMI online shop, you will find a variety of rubber washers, round rubber bumpers, and sleeves that can be used as a seal, rubber buffer or stop buffer. These are the selectable materials: heat-resistant, antistatic, abrasion-resistant, highly abrasion-resistant, low-rebound polyurethane rubber (PU/PUR), Vulkollan(r), ceramic polyurethane rubber, nitrile rubber (NBR), chloroprene rubber (CR), ethylene rubber (EPDM), silicone rubber (SI), fluorine rubber (FPM), hard rubber, butyl rubber (IIR), natural rubber, nitrile rubber foam, chloroprene rubber foam, polyethylene foam (EPDM foam), EPT sealing material, silicone rubber foam, fluorine rubber foam, special polyurethane foam SOFRAS, polyester felt, polyester felt with the appropriate resistances.
The different hardnesses in Asker C5 to C35, Asker F75 to F85 and Shore A15 to A95 enable the required sealing and damping properties. The outside diameters range from 6 to 100 mm. Inside diameters are available up to 80 mm and they can be configured. Round rubber dampers, washers and rubber sleeves are available in lengths of 1 to 500 mm.

MISUMI's rubber washers and rubber sleeves are used across all mechanical engineering industries due to the high variety of available materials.