Dowel Pins, Spring Pins, Stepped Pins（Page 4）
Filter products by: Shape
?* Information on days to ship and prices
- << Previous
- 1
- 2
- 3
- 4
-
- Promotional pricing ends 30/11/2024
Parallel Pin, Type A, M6【1-1,000 Pieces Per Package】
OHKITA
A pin with a positive tolerance.- Volume Discount
Configure nowStarting from∗ ： 0.11 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 0.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Knock Pin A Type
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.- Volume Discount
Configure nowStarting from∗ ： 0.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spring Pin (Light Load)【1-1,000 Pieces Per Package】
OCHIAI
The opening section is wave-shaped to prevent product entanglement.- Volume Discount
Configure nowStarting from∗ ： 0.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
S45C-Q Tapered Pin【1-100 Pieces Per Package】
HIMENO PRECISION
Finished and heat treated. Pin with 1/50 taper on the sides.- Volume Discount
Configure nowStarting from∗ ： 0.32 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Long Super Shaft【5-10 Pieces Per Package】
KS SANGYO
Product standardized in KS Sangyo based on JIS B1354 parallel pin. The sizes are available starting from ultra-fine.Configure nowStarting from∗ ： 57.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Grooved Pin E Type【1-1,000 Pieces Per Package】
SUNCO
[Features] There are 3 grooves in the centre. [Material] Steel- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grooved Pin F Type【1-1,000 Pieces Per Package】
SUNCO
[Features] Simple locating pin common in Europe and the United States.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
S45C-A Parallel Pin, A Type / Soft (m6)【100 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are more accurate than those of the B type. Used for rotating shafts, hinges, etc.
* "m6" is the JIS fitting tolerance.- Volume Discount
Configure nowStarting from∗ ： 8.62 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
S45C-Q Parallel Pin, A Type / Hard (m6)【100 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are more accurate than those of the B type. Used for rotating shafts, hinges, etc.
* "m6" is the JIS fitting tolerance.- Volume Discount
Configure nowStarting from∗ ： 15.75 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
S45C Tapered Pin【1-1,000 Pieces Per Package】
OHKITA
[Features] Positive tolerance taper pin with 1/50 taper for positioning, etc.- Volume Discount
Configure nowStarting from∗ ： 0.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
(Hardened) Tapered Pin【1-500 Pieces Per Package】
OHKITA
[Features] Positive tolerance hardness taper pin. Pin with 1/50 taper for positioning etc.- Volume Discount
Configure nowStarting from∗ ： 1.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Parallel Pin Type A【1-100 Pieces Per Package】
TAIYO STAINLESS SPRING
[Features] Steel cylindrical pin with large outer dimensions and high accuracy for rotary shafts, hinges, etc.- Volume Discount
Configure nowStarting from∗ ： 0.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 0.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 11.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 81.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 81.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 0.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 192.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Pin (A-Type, Made By Ohkita)
SUNCO
They are widely used not only for positioning purposes but also as machine parts. It has excellent corrosion resistance to various media, including sea water and salt water, and is used for sea water pumps, pipeline parts, valves, food machinery, etc.- Volume Discount
Configure nowStarting from∗ ： 0.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Pin (B-Type, Made By Ohkita)【100-1,000 Pieces Per Package】
SUNCO
[Material] SUS316
[Shape] Both ends flat tipped
[Tolerance] h7Configure nowStarting from∗ ： 115.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Long Parallel Pin [h7] SUS303](//uk.misumi-ec.com/linked/material/mech/OKT1/PHOTO/221006225505.jpg?$product_view_b$)
Long Parallel Pin [h7] SUS303
OHKITA
Pin is 300 mm or longer. Cut for use.
Features outstanding corrosion resistance and machining resistance.
Polishing completed for h7 tolerance.
Material = SUS303 Equivalent- Volume Discount
Configure nowStarting from∗ ： 9.98 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Knock Pin B Type
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.- Volume Discount
Configure nowStarting from∗ ： 0.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Knock Pin C Type
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.
Material = A1 (Stainless Steel)- Volume Discount
Configure nowStarting from∗ ： 0.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Knock Pin D Type
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.- Volume Discount
Configure nowStarting from∗ ： 0.22 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Knock Pin E Type
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.- Volume Discount
Configure nowStarting from∗ ： 0.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Knock Pin F Type
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.- Volume Discount
Configure nowStarting from∗ ： 0.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 145.20 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
DIN 1474 Half len.rev.groov.pin
REYHER
Grooved pins; Grooved pins, reverse grooved half length; compare ISO 8741- Volume Discount
Configure nowStarting from∗ ： 0.15 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
ISO 8744 Grooved pins
REYHER
Grooved pins; Grooved pins, taper grooved; compare DIN 1471- Volume Discount
Configure nowStarting from∗ ： 0.12 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
![Long Parallel Pin [h7] SUS303](http://uk.misumi-ec.com/linked/material/mech/OKT1/PHOTO/221006225505.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Shape |
| Material |
| Shaft Dia. Tolerance |
| Shaft End Shape |
| Nominal Dia. |
| Length |
| Properties |
| O.D. (Max.)(mm) |
| Outer Dia. (Min.)(mm) |
| Surface Treatment |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OHKITA | SUNCO | SUNCO | SUNCO | OHKITA | OCHIAI | HIMENO PRECISION | KS SANGYO | SUNCO | SUNCO | TAIYO STAINLESS SPRING | TAIYO STAINLESS SPRING | OHKITA | OHKITA | TAIYO STAINLESS SPRING | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | ESCO | SUNCO | SUNCO | OHKITA | OHKITA | OHKITA | OHKITA | OHKITA | OHKITA | REYHER | REYHER | REYHER |
| Product Series | (Tempered) A-Type Parallel Pin m6【1-1,000 Pieces Per Package】 | S45C-A Parallel Pin, A Type / Soft (m6)【100 Pieces Per Package】 | S45C-Q Parallel Pin, A Type / Hard (m6)【100 Pieces Per Package】 | Parallel Pin (Stainless Steel B Type) Taiyo Stainless Spring Co.,Ltd. Made【1-100 Pieces Per Package】 | Spring Pin (Straight) Solar Stainless Steel Spring【2,000 Pieces Per Package】 | Spring Pin (Waveform) Solar Stainless Steel Spring【5,000 Pieces Per Package】 | Parallel Pin (B-Type, Made By Ohkita)【100-1,000 Pieces Per Package】 | ||||||||||||||||||||||||||||
| CAD |
|
| |||||||||||||||||||||||||||||||||
| Starting from∗ | 0.11 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.28 € *Unit price with basic configuration Volume Discount | 1.62 € *Unit price with basic configuration Volume Discount | 0.22 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.06 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.32 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 57.94 € *Unit price with basic configuration | 1.48 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 2.44 € *Unit price with basic configuration Volume Discount | 8.62 € *Unit price with basic configuration Volume Discount | 15.75 € *Unit price with basic configuration Volume Discount | 0.84 € *Unit price with basic configuration Volume Discount | 1.35 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.16 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.68 € *Unit price with basic configuration Volume Discount | 0.30 € *Unit price with basic configuration Volume Discount | 0.42 € *Unit price with basic configuration Volume Discount | 0.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 11.86 € *Unit price with basic configuration Volume Discount | 81.08 € *Unit price with basic configuration | 81.50 € *Unit price with basic configuration | 0.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 192.56 € *Unit price with basic configuration | 0.30 € *Unit price with basic configuration Volume Discount | 115.94 € *Unit price with basic configuration | 9.98 € *Unit price with basic configuration Volume Discount | 0.22 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.22 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.22 € *Unit price with basic configuration Volume Discount | 0.22 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.36 € *Unit price with basic configuration Volume Discount | 145.20 € *Unit price with basic configuration Volume Discount | 0.15 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.12 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | 6 Days | 6 Days | Same day | Same day | Same day | 6 Days | Same day | 6 Days | 9 Days | 9 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 7 Days | Same day | Same day | 7 Days | Same day | 7 Days | 3 Days | Same day | 3 Days |
| Shape | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | - | - | Spring Pins | Taper | Straight / Dual-Fit Dowel | Spring Pins | Spring Pins | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Taper | Taper | Straight / Dual-Fit Dowel | - | Straight / Dual-Fit Dowel | - | - | - | - | - | - | - | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | - | - | - | - | Spring Pins | Spring Pins | Taper |
| Material | Steel | Steel | Steel | Stainless Steel | Steel | Stainless Steel | Steel | - | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | Stainless Steel | Stainless Steel | - | Steel | Stainless Steel ～ Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel ～ Steel |
| Shaft Dia. Tolerance | Positive Tolerance | Positive Tolerance | - | - | - | Positive Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | - | Positive Tolerance | - | - | - | - | - | - | - | Positive Tolerance | Positive Tolerance / Negative Tolerance | - | - | - | - | - | - | - | - | - |
| Shaft End Shape | Standard | Standard | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | - | - | - | - | - | - | - | Standard | Standard | - | Standard | Standard | Standard | Standard | - | - | - | - |
| Nominal Dia. | 1 ～ 30 | 3 ～ 30 | 3 | 1 ～ 2 | 1.5 ～ 10 | 1.6 ～ 4 | 3 ～ 25 | 4 ～ 6 | 1.5 ～ 8 | 2 ～ 8 | 4 ～ 6 | 4 ～ 6 | 1 ～ 30 | 3 ～ 20 | 4 ～ 6 | 8 ～ 16 | 3 | 4 | 4 ～ 6 | 16 ～ 20 | 2.5 | 1.2 ～ 2 | 1 ～ 6 | - | 3 ～ 4 | 2 ～ 6 | 3 ～ 20 | 1.5 ～ 10 | 1 ～ 8 | 1.5 ～ 8 | 1.5 ～ 8 | 2 ～ 8 | 2 | 1.5 ～ 12 | 1.5 ～ 12 |
| Length | 4 ～ 200 | 6 ～ 150 | 8 ～ 15 | 3 ～ 20 | 4 ～ 60 | 5 ～ 50 | 14 ～ 150 | 80 ～ 150 | 8 ～ 60 | 12 ～ 32 | 6 ～ 28 | 10 ～ 18 | 10 ～ 200 | 22 ～ 150 | 8 ～ 50 | 10 ～ 100 | 4 | 32 | 8 ～ 60 | 40 ～ 180 | 10 | 7 ～ 9 | 4 ～ 63 | - | 4 ～ 10 | 5 ～ 30 | 300 ～ 350 | 6 ～ 70 | 4 ～ 60 | 6 ～ 80 | 8 ～ 60 | 12 ～ 32 | 0 | 6 ～ 70 | 6 ～ 100 |
| Properties | Regular | Regular | - | - | Regular | Light Load | - | - | Regular | Regular | Regular | Regular | Regular | Regular | Regular | - | Regular | - | - | - | - | - | - | - | Regular | Regular | Regular | Regular | Regular | Regular | Regular | Regular | - | - | - |
| O.D. (Max.)(mm) | - | - | - | - | 1.6 ～ 10.45 | 1.8 ～ 4.4 | - | - | 1.6 ～ 8.35 | 2.15 ～ 8.3 | - | - | - | - | - | - | 2.008 | - | - | - | - | - | - | - | 2.008 | 4 | - | 1.63 ～ 10.45 | 1.05 ～ 8.3 | 1.6 ～ 8.4 | 1.6 ～ 8.35 | 2.15 ～ 8.3 | - | - | - |
| Outer Dia. (Min.)(mm) | - | - | - | - | - | 1.7 ～ 4.2 | - | - | - | - | - | - | - | - | - | - | 2.002 | - | - | - | - | - | - | - | 2.002 | 3.988 | - | - | - | - | - | - | - | - | - |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | - | - | Not Provided | Not Provided | Not Provided | - | - | - | - | - | Not Provided | Not Provided | Not Provided |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | - |
![Long Parallel Pin [h7] SUS303](http://uk.misumi-ec.com/linked/material/mech/OKT1/PHOTO/221006225505.jpg?$product_view_c$)
Loading...
- << Previous
- 1
- 2
- 3
- 4
Filter by:
Stock
-
- Show only stock items
-
Material
-
Shaft Dia. Tolerance
-
Shaft End Shape
-
Nominal Dia.
-
Length
-
Properties
-
O.D. (Max.)(mm)
-
Outer Dia. (Min.)(mm)
-
Surface Treatment
-
Sales Unit
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 1 Day or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Categories related to Dowel Pins, Spring Pins, Stepped Pins
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.