Registar
Condições de filtragem

Limpar tudo

  • Estoque
  • Tool Diameter(mm)
    [1.8-5/0.1mm unidades]
    [0.3-15.99/0.01mm unidades]
    [0.3-15.995/0.005mm unidades]
  • Groove Length(mm)
    [0.5-48/0.5mm unidades]
    [3-10/1mm unidades]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
  • Reamers

    Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
    • Carbide Straight Reamer
      • Volume Discount

      OSG

      Carbide Straight Reamer

      The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
      Ler mais
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.3 ~ 13.05End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
      Preço regular (excluindo IVA):
      35.50 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

        MISUMI

        High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

        [Features] -Standard spiral reamer right cutting edge left spiral angle 12°-Cutting diameter can be selected in units of 0.01 mm-Helical cutting edge reduces cutting force.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]30 ~ 150N/ASpiralN/A--
        Preço regular (excluindo IVA):
        40.37 €
        Data de envio regular:
        7 dias úteis
        Configurar
      • F.P. Gold Reamer Straight Blade
        • DESCONTO
        • Volume Discount

        FPTOOLS

        F.P. Gold Reamer Straight Blade

        [Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        1 ~ 14.05End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 85AvailableStraightN/A--
        Preço regular (excluindo IVA):
        29.83 €
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock - 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
        • Volume Discount

        MISUMI

        High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model

        [Features] -Standard hand reamer with straight blade-Cutting diameter can be selected in units of 0.01 mm.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        0.5 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 150N/AStraightN/A--
        Preço regular (excluindo IVA):
        22.89 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • Solid Long Hand Reamer CSLHR
        • Volume Discount

        EIKOSHA

        Solid Long Hand Reamer CSLHR

        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        0.4 ~ 10.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]20 ~ 150N/AStraightN/A--
        Preço regular (excluindo IVA):
        83.85 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Adjustable Reamer
        • DESCONTO

        FPTOOLS

        Adjustable Reamer

        Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        6.35~7.15 ~ 30.25~34.25-General Steel[○] / Alloy Steel[○]35 ~ 98--N/A--
        Preço regular (excluindo IVA):
        91.18 €
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock - 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Machine Reamer
        • Volume Discount

        EIKOSHA

        Machine Reamer

        A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.[Features]· Morse taper shank is adopted for machine use.[Applications]· For general purpose finishing.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2.95 ~ 85Taper shank / Morse Taper ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35 ~ 215N/AStraightN/A--
        Preço regular (excluindo IVA):
        100.37 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

          MISUMI

          Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

          [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
          Data de envio regular:
          7 dias úteis
          Configurar
        • Straight Reamer with Carbide Bottom Blade
          • Volume Discount

          MISUMI

          Straight Reamer with Carbide Bottom Blade

          [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]27 ~ 40N/AStraightAvailable--
          Preço regular (excluindo IVA):
          54.96 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Straight Reamer, Regular Model

            MISUMI

            Carbide Straight Reamer, Regular Model

            [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute length
            Ler mais
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            0.3 ~ 15.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightN/A--
            Data de envio regular:
            7 dias úteis
            Configurar
          • High-Speed Steel Machine Reamer, Straight Blade, Straight Right Blade, 0.01 mm Unit Designation Model

              MISUMI

              High-Speed Steel Machine Reamer, Straight Blade, Straight Right Blade, 0.01 mm Unit Designation Model

              [Features] -Standard straight edge machine reamer. Morse taper shank-Cutting diameter selectable in units of 0.01 mm.
              Ler mais
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              2.95 ~ 30.02Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]35 ~ 150N/AStraightN/A--
              Preço regular (excluindo IVA):
              108.45 €
              Data de envio regular:
              7 dias úteis
              Configurar
            • Short Reamer
              • DESCONTO
              • Volume Discount

              FPTOOLS

              Short Reamer

              [Features]· Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and short blade length.· As the bite length is short, it is capable of processing blind holes.· The cobalt HSS has been coated with a newly developed special coating featuring coating hardness of 3,700 Hv, providing excellent abrasion resistance.· End mill shank is adopted.
              Ler mais
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1 ~ 12.095End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[◎]12 ~ 30AvailableSpiralN/A--
              Preço regular (excluindo IVA):
              61.72 €
              Preço regular (excluindo IVA):
              Preço especial
              Data de envio regular:
              Item em stock - 1 dia útil
              Alguns artigos podem ser enviados no próprio dia
              Configurar
            • F.P. Gold Reamer Spiral Blade
              • DESCONTO
              • Volume Discount

              FPTOOLS

              F.P. Gold Reamer Spiral Blade

              [Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
              Ler mais
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1 ~ 14.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 85AvailableSpiralN/A--
              Preço regular (excluindo IVA):
              38.50 €
              Preço regular (excluindo IVA):
              Preço especial
              Data de envio regular:
              Item em stock - 1 dia útil
              Alguns artigos podem ser enviados no próprio dia
              Configurar
            • Mill Reamer (Morse Taper Shank)

                NIKKEN KOSAKUSHO

                Mill Reamer (Morse Taper Shank)

                [Features] Enables high-speed cutting and high efficiency and uses carbide materials with high hardness.
                Ler mais
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                3 ~ 50-General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Heat-resistant alloy[○] / Alloy Steel[○]-N/A----
                Preço regular (excluindo IVA):
                133.49 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Carbide Straight Reamer, Long Model

                  MISUMI

                  Carbide Straight Reamer, Long Model

                  [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.
                  Ler mais
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  0.3 ~ 5.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightN/A--
                  Data de envio regular:
                  8 dias úteis
                  Configurar
                • Cobalt High-Speed Steel Spiral Reamer
                  • Volume Discount

                  MISUMI

                  Cobalt High-Speed Steel Spiral Reamer

                  [Features] -Spiral reamer made of cobalt high-speed steel with high versatility-Design with 10° left bevel angle and 45° tip bevel angle-Helical blade reduces cutting force.
                  Ler mais
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  1 ~ 13End Mill ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]15 ~ 44N/ASpiralN/A--
                  Preço regular (excluindo IVA):
                  25.49 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
                • High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Straight Shank, 0.1 mm Unit Designation Model

                    MISUMI

                    High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Straight Shank, 0.1 mm Unit Designation Model

                    [Features] Standard reamer with high helix angle, right blade, left helix angle, 60°. Cutting force is reduced by the high helix angleCutting diameter can be selected in units of 0.1 mm.
                    Ler mais
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    2 ~ 14Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]13 ~ 45N/ASpiralN/A--
                    Preço regular (excluindo IVA):
                    46.28 €
                    Data de envio regular:
                    7 dias úteis
                    Configurar
                  • High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, 0.01 mm Unit Designation Model

                      MISUMI

                      High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, 0.01 mm Unit Designation Model

                      [Features] -Standard spiral reamer with right blade and left spiral angle of 60°. Cutting force is reduced by the strong helix angle-Cutting diameter can be selected in units of 0.01 mm.
                      Ler mais
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      2.01 ~ 13.99Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]13 ~ 45N/ASpiralN/A--
                      Preço regular (excluindo IVA):
                      48.22 €
                      Data de envio regular:
                      7 dias úteis
                      Configurar
                    • Carbide µ (Mu) Reamer
                      • DESCONTO
                      • Volume Discount

                      FPTOOLS

                      Carbide µ (Mu) Reamer

                      [Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
                      Ler mais
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      0.5 ~ 10.009End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 40N/AStraightN/A--
                      Preço regular (excluindo IVA):
                      65.44 €
                      Preço regular (excluindo IVA):
                      Preço especial
                      Data de envio regular:
                      Item em stock - 1 dia útil
                      Alguns artigos podem ser enviados no próprio dia
                      Configurar
                    • Carbide Reamer C Series
                      • Volume Discount

                      FPTOOLS

                      Carbide Reamer C Series

                      [Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
                      Ler mais
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      2.91 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 25N/AStraightN/A--
                      Preço regular (excluindo IVA):
                      45.21 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Carbide Reamer H Series
                      • DESCONTO
                      • Volume Discount

                      FPTOOLS

                      Carbide Reamer H Series

                      [Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
                      Ler mais
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      1 ~ 15.5End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]8 ~ 45N/ASpiralN/A--
                      Preço regular (excluindo IVA):
                      112.58 €
                      Preço regular (excluindo IVA):
                      Preço especial
                      Data de envio regular:
                      Item em stock - 1 dia útil
                      Alguns artigos podem ser enviados no próprio dia
                      Configurar
                    • HR Handle Reamer
                      • DESCONTO
                      • Volume Discount

                      OKAZAKI SEIKO

                      HR Handle Reamer

                      Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).
                      Ler mais
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      1 ~ 40Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]20 ~ 165N/AStraightN/A--
                      Preço regular (excluindo IVA):
                      31.56 €
                      Preço regular (excluindo IVA):
                      Preço especial
                      Data de envio regular:
                      Item em stock - 1 dia útil
                      Alguns artigos podem ser enviados no próprio dia
                      Configurar
                    • Reamer with End Blades ERR-TiN

                        EIKOSHA

                        Reamer with End Blades ERR-TiN

                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        2.95 ~ 50End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]16 ~ 30AvailableSpiralAvailable--
                        Preço regular (excluindo IVA):
                        100.47 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Drill Reamers DR

                          EIKOSHA

                          Drill Reamers DR

                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          3 ~ 13Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]52 ~ 100N/ASpiralN/A--
                          Preço regular (excluindo IVA):
                          126.51 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • Full Cut Solid Carbide Reamers MRS
                          • Volume Discount

                          MAKOTOLOY

                          Full Cut Solid Carbide Reamers MRS

                          [Features]· Made using carefully selected carbide materials for excellent sharpness, precision, surface roughness and rigidity.
                          Ler mais
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.51 ~ 10-General Steel[○] / Cast Iron[○] / Aluminum[○]15 ~ 40-StraightN/A--
                          Preço regular (excluindo IVA):
                          49.36 €
                          Data de envio regular:
                          8 dias úteis
                          Configurar
                        • Spiral Reamer with Carbide Bottom Blade
                          • Volume Discount

                          MISUMI

                          Spiral Reamer with Carbide Bottom Blade

                          [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Even higher cutting speed is possible by using spiral grooves
                          Ler mais
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]20 ~ 30N/ASpiralAvailable--
                          Preço regular (excluindo IVA):
                          86.03 €
                          Data de envio regular:
                          5 dias úteis
                          Configurar
                        • Carbide Spiral Reamer, High-Precision Tolerance Model
                          • Volume Discount

                          MISUMI

                          Carbide Spiral Reamer, High-Precision Tolerance Model

                          [Features] -Achieves high-precision hole machining by reducing the tolerance width of the cutting diameter-High-speed cutting greatly improves efficiency compared to high-speed steel reamers-The long service life makes it possible to maintain high-precision machining for a long time.-Even higher cutting speed is possible by using spiral grooves.
                          Ler mais
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          1 ~ 13End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]10 ~ 44N/ASpiralN/A--
                          Preço regular (excluindo IVA):
                          42.63 €
                          Data de envio regular:
                          5 dias úteis
                          Configurar
                        • High-Speed Steel Spiral Machine Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

                            MISUMI

                            High-Speed Steel Spiral Machine Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

                            [Features] -Standard spiral reamer with right flute and left spiral angle 12°. Morse taper shank-Cutting diameter selectable in units of 0.01 mm-Helical blade reduces cutting force.
                            Ler mais
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            3 ~ 30.02Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]35 ~ 150N/ASpiralN/A--
                            Preço regular (excluindo IVA):
                            116.92 €
                            Data de envio regular:
                            7 dias úteis
                            Configurar
                          • High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Tapered Shank, 0.1 mm Unit Designation Model

                              MISUMI

                              High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Tapered Shank, 0.1 mm Unit Designation Model

                              [Features] Standard reamer with high helix angle, right blade, left helix angle, 60°. Cutting force is reduced by the high helix angleCutting diameter can be selected in units of 0.01 mm.
                              Ler mais
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              4 ~ 30Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]22 ~ 60N/ASpiralN/A--
                              Preço regular (excluindo IVA):
                              83.19 €
                              Data de envio regular:
                              5 dias úteis
                              Configurar
                            • Taper Pin Reamer TPR
                              • DESCONTO
                              • Volume Discount

                              EIKOSHA

                              Taper Pin Reamer TPR

                              For 1/48 and 1/50 Taper Pins
                              Ler mais
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]99 ~ 194N/AStraightN/A6 ~ 127.88 ~ 15.74
                              Preço regular (excluindo IVA):
                              45.12 €
                              Preço regular (excluindo IVA):
                              Preço especial
                              Data de envio regular:
                              Item em stock - 1 dia útil
                              Alguns artigos podem ser enviados no próprio dia
                              Configurar
                            • Carbide Reamer G Series
                              • DESCONTO
                              • Volume Discount

                              FPTOOLS

                              Carbide Reamer G Series

                              [Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
                              Ler mais
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              0.2 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]3 ~ 45N/AStraightN/A--
                              Preço regular (excluindo IVA):
                              26.28 €
                              Preço regular (excluindo IVA):
                              Preço especial
                              Data de envio regular:
                              Item em stock - 1 dia útil
                              Alguns artigos podem ser enviados no próprio dia
                              Configurar
                            • Handle Reamer HR
                              • DESCONTO
                              • Volume Discount

                              EIKOSHA

                              Handle Reamer HR

                              General-purpose straight reamer (HSS) with straight edge that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Blade tip diameter: Available from 0.5 to 60.· Shank type: Available in end mill shank and straight shank.· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.· Material: SKH51. Right-blade Straight, Bite Angle: 1°.[Applications]· Optimal for general purpose finishing.
                              Ler mais
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              0.56 ~ 28End Mill Shank / Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12 ~ 140N/AStraightN/A--
                              Preço regular (excluindo IVA):
                              28.09 €
                              Preço regular (excluindo IVA):
                              Preço especial
                              Data de envio regular:
                              Item em stock - 1 dia útil
                              Alguns artigos podem ser enviados no próprio dia
                              Configurar
                            • Spiral Taper Pin Reamer
                              • Volume Discount

                              EIKOSHA

                              Spiral Taper Pin Reamer

                              Screw Type for 1/48 and 1/50 Taper Pins Reduces Cutting Resistance
                              Ler mais
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]48 ~ 318N/ASpiralN/A1.9 ~ 29.72.86 ~ 36.06
                              Preço regular (excluindo IVA):
                              42.83 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • RZ Reamer RZ-S

                                DAIICHITOOL

                                RZ Reamer RZ-S

                                [Features]· Chips are discharged toward the back instead of being accumulated at the bottom.· The depth is freely controlled by adjusting the shank.
                                Ler mais
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                3 ~ 13Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]20 ~ 30-Spiral---
                                Preço regular (excluindo IVA):
                                86.92 €
                                Data de envio regular:
                                8 dias úteis
                                Configurar
                              • Long Handle Reamer LHR

                                  DAIICHITOOL

                                  Long Handle Reamer LHR

                                  [Features] -The material is HSS.Tool material: High speed steelCutting edge shape: StraightMaterial: General steel / Stainless steel / Cast iron / Aluminium / CopperMaterial details: Steel alloy, compatibleShank type: Straight shank.
                                  Ler mais
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  1 ~ 20Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]50 ~ 250-Straight---
                                  Preço regular (excluindo IVA):
                                  79.79 €
                                  Data de envio regular:
                                  8 dias úteis
                                  Configurar
                                • Hand Reamer (0.01 steps)
                                  • Volume Discount

                                  OKAZAKI SEIKO

                                  Hand Reamer (0.01 steps)

                                  [Features]・ For hole finishing machining of cast iron and general steel・ MCO material (cobalt HSS) is used
                                  Ler mais
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  1 ~ 2End Mill ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]30N/AStraightN/A--
                                  Preço regular (excluindo IVA):
                                  43.18 €
                                  Data de envio regular:
                                  10 dias úteis
                                  Configurar
                                • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                                    MISUMI

                                    Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                                    [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
                                    Ler mais
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    0.3 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                                    Data de envio regular:
                                    7 dias úteis
                                    Configurar
                                  • Carbide Helical Reamer
                                    • Volume Discount

                                    MISUMI

                                    Carbide Helical Reamer

                                    [Features] -High-speed milling significantly improves efficiency compared to high-speed steel reamers-High-speed milling is possible by using spiral grooves.
                                    Ler mais
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    3 ~ 10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]25 ~ 40N/ASpiralN/A--
                                    Preço regular (excluindo IVA):
                                    75.94 €
                                    Data de envio regular:
                                    5 dias úteis
                                    Configurar
                                  • High-Speed Steel Spiral Hand Reamer

                                      MISUMI

                                      High-Speed Steel Spiral Hand Reamer

                                      Frequently used standard sizes are offered at affordable prices
                                      Ler mais
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      2 ~ 12Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]25 ~ 76N/ASpiralN/A--
                                      Preço regular (excluindo IVA):
                                      33.63 €
                                      Data de envio regular:
                                      5 dias úteis
                                      Configurar
                                    • Carbide Step Reamer, Custom Dimensions Type

                                        MISUMI

                                        Carbide Step Reamer, Custom Dimensions Type

                                        [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                                        Ler mais
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                                        Data de envio regular:
                                        7 dias úteis
                                        Configurar
                                      • Coated Solid Spiral Reamer CSPR-C
                                        • DESCONTO
                                        • Volume Discount

                                        EIKOSHA

                                        Coated Solid Spiral Reamer CSPR-C

                                        The Usage of the TICN1297 Coating Prevents Deposition, and Improves Finished Surface Roughness
                                        Ler mais
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        0.8 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]15 ~ 45AvailableSpiralN/A--
                                        Preço regular (excluindo IVA):
                                        72.25 €
                                        Preço regular (excluindo IVA):
                                        Preço especial
                                        Data de envio regular:
                                        Item em stock - 1 dia útil
                                        Alguns artigos podem ser enviados no próprio dia
                                        Configurar
                                      • Solid Taper Pin Reamer CSTPR
                                        • Volume Discount

                                        EIKOSHA

                                        Solid Taper Pin Reamer CSTPR

                                        For 1/50 Taper Pins
                                        Ler mais
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]28 ~ 194N/AStraightN/A1 ~ 131.46 ~ 16.74
                                        Preço regular (excluindo IVA):
                                        65.14 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Long Handle Reamer LHR
                                        • Volume Discount

                                        EIKOSHA

                                        Long Handle Reamer LHR

                                        For long type deep hole, Hold on slop to improve assistance 1
                                        Ler mais
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        1/2 ~ 26Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]50 ~ 250N/AStraightN/A--
                                        Preço regular (excluindo IVA):
                                        98.43 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Straight Shank Spiral Chucking Reamer SPSCR
                                        • Volume Discount

                                        EIKOSHA

                                        Straight Shank Spiral Chucking Reamer SPSCR

                                        For General-Purpose Short blade, long shank, for deep hole finishing
                                        Ler mais
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        1/2 ~ 25Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]20 ~ 65N/ASpiralN/A--
                                        Preço regular (excluindo IVA):
                                        83.88 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Helical Tapered Pin Reamer HTPR
                                        • Volume Discount

                                        EIKOSHA

                                        Helical Tapered Pin Reamer HTPR

                                        Strong Screw Type for 1/48 and 1/50 Taper Pins Reduces Cutting Resistance
                                        Ler mais
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        -Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]28 ~ 318N/AHelicalN/A1 ~ 301.46 ~ 36.06
                                        Preço regular (excluindo IVA):
                                        88.31 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar