• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
ideanote
inCAD Library

Make sure to read this before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. MISUMI reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

Features of inCAD Library

  1. Get great new design ideas for these application examples.

    2. Over 200 design application ideas collected from dozens of industries!

  2. Find application examples quickly! Search by function, workpiece shape, etc.


  3. Download the CAD models for each application example.

    4. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! Button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Back to top

inCAD Library Keyword Search
inCAD Library No. Search

No.000003 Roller Runout Inspection
Good IDEA!
35

The workpiece is held with V blocks and urethane molded bearings, enabling highly accurate runout inspection.

Related Category

Toggle Clamp

Toggle Clamp
Product name Horizontal Handle
Model number MC01-S1
Characteristics Hold Down, Flange Base Type. Low Profile-design.
* Orange colored cells in the table below indicate the part numbers that were actually used in this app. example.
Selection criteria | Available sizes

Selection criteria

Clamping force, Toggle clamp size and style

Back to page top

Available sizes

■Toggle Clamps - Horizontal Handle Type

Body material EN 1.0038 Equiv. EN 1.4301 Equiv.
Surface treatment Trivalent Chromate -
Clamping Force (N) 264.6 264.6 882 2352 264.6 264.6 882 2352
Weight (g) 30 35 130 265 30 35 130 265
Arm open - close angle 90° 90° 85° 90° 90° 90° 85° 90°
Handle open - close angle 75° 75° 73° 65° 75° 75° 73° 65°
Width 23.8 23.8 36 35 23.8 23.8 36 35
Height (Clampled) 17.3 17.3 37.8 47.6 17.3 17.3 37.8 47.6
Height (Unclamped) 48.3 48.3 96.8 110.2 48.3 48.3 96.8 110.2
Length (Clamped) 71 69.1 143.5 173 71 69.1 143.5 173
Clamp position Fixed Variable Variable Variable Fixed Variable Variable Variable
Accessory Nylon Bolt Bolt with rubber
Material: NBR
Hardness: Shore A70 		Stainless steel bolt

* Please see the product pages for shape details and dimensions.

Back to page top

Silicon Rubber Mold Bearings

Silicon Rubber Mold Bearings
Product name Silicon Rubber Mold Bearings/Crown/with Threaded Shaft
Model number UMBWRT3-12
* Orange colored cells in the table below indicate the part numbers that were actually used in this app. example.
Selection criteria | Available sizes | Performance info.

Selection criteria

To protect the workpiece and assist rotation.

Back to page top

Available sizes

■Silicon Rubber Mold Bearings - Crown, with Threaded Shaft

Roller Bearing
material 		Shaft Threaded Type
Material Hardness Color Material Surface treatment Standard Long
Urethane Shore A90 Black EN 1.3505 Equiv. Free Cutting Steel Electroless nickel plating ○ ○
EN 1.4125 Equiv. EN 1.4305 Equiv. - ○ -
White EN 1.3505 Equiv. Free Cutting Steel Trivalent Chromate ○ ○
EN 1.4125 Equiv. EN 1.4305 Equiv. - ○ ○
Shore A70 Black EN 1.3505 Equiv. Free Cutting Steel Electroless nickel plating ○ -
White EN 1.3505 Equiv. Free Cutting Steel Trivalent Chromate ○ -
Silicon rubber Shore A70 Lt. Gray EN 1.3505 Equiv. Free Cutting Steel Electroless nickel plating ○ ○
EN 1.4125 Equiv. EN 1.4305 Equiv. - ○ ○
Anti-static urethane Shore A90 Gray EN 1.3505 Equiv. Free Cutting Steel Electroless nickel plating ○ ○

■Size variations and demensions

Roller Screw diameter
(Coarse) 		Thread section length
Shaft diameter Outer diameter Width R
Crown Radius		 Standard Long
Ø3 Ø12 3 R5 M3 4 6
Ø4 Ø13 4 M4 5 8
Ø16 5
Ø5
Ø20
Ø6 M6 8 12
Ø28 6
Ø8 7
Ø30 11 R15
Ø10
Ø40
Ø15 12 M10 12 20
Ø45 15
Ø20 12
Ø55 18 R20
Ø25 Ø65 19

* Available sizes in EN 1.4125 Equiv. bearings are for roller shaft DIA. Ø4 ~

Back to page top

Performance info.

■Silicon rubber - Urethane molded bearings (Threaded R Type) alloable loads (N)

Roller Urethane Silicon
Shaft diameter Outer diameter Shore A90 Shore A70 Shore A70
Ø3 Ø12 34 10 9.8
Ø4 Ø13 44 13 13
Ø16 59 16 18
Ø5 16
Ø20 78 20 24
Ø6 23
Ø28 157 44 47
Ø8 176 42
Ø8 Ø30 81 53
Ø10 94
Ø40 274 136 82
Ø15 122
Ø45 343 109 103
Ø20 130
Ø55 490 225 147
Ø25 Ø65 750 333 226

Back to page top

IDEA NOTE Economical holding mechanism

The roller is held by V blocks and urethane molded bearings

IDEA NOTE Window on the upper fixture

A viewport is provided to visually check the contact between sensor and roller during measurement.

IDEA NOTE Toggle clamp tips are spring loaded.

Spring loaded tips are utilized to support toggle clamp hold down of upper fixture.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Good IDEA!

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.

      3. * The part in the frame is a sub-assembly unit.

    3. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    4. The Data including the third-part components are made by the Company.

    Back to top

  • * Unit assembly CAD data consists of some sub-assemblies.
       Each sub-assembly unit can be used as it is or can be edited.

Application Overview

Purpose

  • The roller is positioned using V blocks and urethane modled bearings.

Points for use

  • Upper fixture with urethane molded bearings is held with toggle clamps to prevent roller from moving in vertical direction.
  • Runout is measured with a contacting displacement sensor.
  • The upper fixture is held with toggle clamps to prevent the roller from lifting.

Target workpiece

  • Roller
  • Outer dimensions: Ø20 x L120
  • Workpiece weight: 150g

Design Specifications

Operating Conditions or Design Requirements

  • Toggle clamp arm open / close angle: 90°
  • External dimensions: W150 x D150 x H107

Required Performance

  • Runout measurement accuracy: 0.01mm increment

Selection Criteria for Main Components

  • Toggle clamp
    • Vertical action type chosen since the roller is held with V blocks
  • Linear guide
    • Appropriate size in relation to the unit size since the applicable moment loads are not very large.

Design Evaluation

Other Design Consideration

  • The roller is centered with the V blocks and urethane molded bearings (3 point contact)
  • The roller can be measured at arbitrary position within the linear guide motion range.
  • The measurement sensor is fixed with a locating pin and a screw to prevent moving during measurements.
  • Upper fixture locating pins arediagonally provided on the V blocks.
  • The measurement sensor is fixed with a locating pin and a screw to prevent moving during measurements.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample picture MISUMI Part Number
For Price and Days to ship click on Part No. 		Quantity
1 Toggle Clamps MC01-S1 2
2 Clamping Bolts TGSPM4 2
3 Ball Bearing UMBWRT3-12 2
4 Metal Washers WSJJ5-3-2 2
5 Linear Guides SSEBZ10-135 1
6 Linear Guides SSEBSZ10-75 1
7 Hex Socket Set Screws CBCPS6-15 2
8 Dowel Pins MSC3-10 4
9 Dowel Pins MSC3-15 2
10 Dowel Pins MSC4-10 4
11 Set Screws Flat Type MSSFS3-5 1
  • The part list above contains only MISUMI parts.
    The list of parts and machined products of other manufacturers than MISUMI can also be downloaded by part list download (CSV).
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Good IDEA!

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.

      3. * The part in the frame is a sub-assembly unit.

    3. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    4. The Data including the third-part components are made by the Company.

    Back to top

Back to top

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.