Parallel Tapped / Clamp Lever (AMKU15)

■Clamp Lever (Refer to P. 2-1139)

DH7	Thin	Standard
10	CLDM5-16-M	CLDM6-16-M
12		CLDM6-16-M
15	CLDM5-20-M	CLDM8-20-M
20	CLDM6-25-M	CLDM8-25-M
25	CLDM6-32-M	CLDM10-32-M
30		CLDM10-40-M
35	CLDM8-40-M	CLDM12-40-M

■Vertical Taps Thin Type

Part Number			P	A	B	C1	E	G	H	S1	M1	M	d	Clamp Lever			Unit Price
Type	DH7													H1	H2	R	KMKU	MMKU	AMKU	SMKU
KMKU MMKU AMKU SMKU	10	+0.015 0	11	31	16	9	15	5	9	8	M4	M5	5.5	35	38.5	45
	12	+0.018 0	13	34			16		10										-
	15		17	45	22	12	20	8	12	12	M5
	20	+0.021 0	20	52	28	16	22	10	15	16	M6	M6	6.6
	25		23	58	32	19	25		18	20
	30		27	66	38		29		21	25	M8
	35	+0.025 0	30	72	45	22	32		24	28		M8	9	45.5	49	63		-	-	-
For the available sizes, refer to the price list. DH7 tolerance is before the slit machining. For mating, g6, f8 shaft tolerances are recommended.

■Parallel Taps Thin Type

Part Number			P	A	B	C1	E	H	S1	M1	M	d	Clamp Lever			Unit Price
Type	DH7												H1	H2	R	KQKU	MQKU	AQKU	SQKU
KQKU MQKU AQKU SQKU	10	+0.015 0	16	31	16	9	15	9	8	M4	M5	5.5	35	38.5	45
	12	+0.018 0	18	34			16	10
	15		25	45	22	12	20	12	12	M5
	20	+0.021 0	30	52	28	16	22	15	16	M6	M6	6.6
	25		33	58	32	19	25	18	20							-		-
	30		37	66	38		29	21	25	M8							-
	35	+0.025 0	40	72	45	22	32	24	28		M8	9	45.5	49	63	-	-		-
For the available sizes, refer to the price list. DH7 tolerance is before the slit machining. For mating, g6, f8 shaft tolerances are recommended.

■Parallel Taps Standard Type

Part Number			P	A	B	E	H	S1	M1	M	d	Clamp Lever			Unit Price
Type	DH7											H1	H2	R	KQK	MQK	AQK	SQK
KQK MQK AQK SQK	10	+0.015 0	16	32	16	16	10	8	M4	M6	6.6	35	38.5	45
	12	+0.018 0	18	35		17	11
	15		25	47	22	22	14	12	M5	M8	9	45.5	49	63
	20	+0.021 0	30	54	28	24	16	16	M6
	25		33	62	32	29	20	20		M10	11	55	59	78
	30		37	68	40	31	22	25	M8								-
	35	+0.025 0	40	77	45	37	26	28		M12	13	67	71	92				-
For the available sizes, refer to the price list. DH7 tolerance is before the slit machining. For mating, g6, f8 shaft tolerances are recommended.