Index Plungers, with sensor (22123.0006)

Material

Body

• Stainless steel 1.4305

Locking pin

• Stainless steel 1.4305, nickel-plated

Knob

• Thermoplastic PA 6, black, dull

Cable

• Thermoplastic PUR, black

Magnet

• Permanent magnet

Sensor

• Thermoplastic PA 6, black, dull

Lock nut

• Stainless steel A2 (ISO 8675)

Assembly

The enclosed separate sensor and sensor clip can be mounted with the enclosed Allen key. The derivation direction of the sensor cable can be determined individually.

• Push the sensor into the side of the sensor clip.
• Tighten the internal hexagon screw of the sensor with light hand force (max. 0.1 Nm).
• Clip the sensor clip into the annular groove of the index plunger in any position.
• By turning the sensor clip, the sensor cable's derivation direction can be adjusted.

Note:

To avoid interferences, no magnetic fields should act on the index plunger.

Operation

When using locking index plungers, the knob is pulled-out, turned 90° and secured by a notched catch (when locking pin should not overhang).

Notes

Knob not removable.

Lock nuts have to be purchased separately.